INFORMASI PENGISIAN BATERAI KENDARAAN SEPEDA MOTOR LISTRIK BERBASIS INTERNET OF THINGS (IOT)

Penulis

DOI:

https://doi.org/10.31000/jika.v9i2.13750

Abstrak

The main problem faced in the use of electric motorcycles is the lack of information in the process of charging the electric motorcycle battery which can have an impact on the costs incurred when charging the electric motorcycle battery. The purpose of this study is for electric motorcycle owners to obtain information such as voltage, current, power, and energy consumed as well as an estimate of the cost of charging the battery in real time while their electric motorcycle is being charged. The methods used include the use of the INA219 sensor to measure electrical parameters, the TP4056 module for charging, and the Wemos D1 Mini ESP8266 to process data and send information to the Blynk platform. The data obtained is displayed on a 16x2 LCD and sent to the Blynk application for remote monitoring. The results obtained can display information on voltage, current, power, and energy consumed as well as an estimate of the cost when charging the electric motorcycle battery via the LCD. This information can also be viewed via a smartphone using the Blynk application so that electric motorcycle users can still get information related to battery charging.

Referensi

Dewi R & Nur M. U. (2023). Tantangan Pengembangan Mobil Listrik Menuju Transportasi Berkelanjutan Di Indonesia. Jurnal Penelitian Sekolah Tinggi Transportasi Darat. Vol 14. No 1. Hal : 22-29

Cakrawati S. (2021). Strategi Pemanfaatan Kendaraan Listrik Berkelanjutan sebagai Solusi untuk Mengurangi Emisi Karbon. Jurnal Paradigma. Vol 2. No 2. Hal : 54-68

Pawel A. (2023). Electric vehicle impact on the environment in terms of the electric energy source — Case study. Energy Reports. Vol 9. Hal : 3813-3821

Mochammad A., Yosua M., Intan A. R., Sri A. I & Joni W. S. (2020). Studi Analisis Perkembangan Teknologi Dan Dukungan Pemerintah Indonesia Terkait Mobil Listrik. Jurnal TESLA. Vol 22. No 1. Hal : 45-55

Rahayu I. S., Djoko W. K. & La Ode M. F. (2023). Studi Kelayakan Jenis Baterai Kendaraan Listrik Roda Empat Dengan Metode Weigthed Objective Untuk Program Kendaraan Listrik Di Indonesia. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin. Vol 13. No 2. Hal : 123-129

Brata P. P. R. & Leksmono S. P. (2023). Dampak Lama Pengisian Baterai Pada Mobil Listrik Terhadap Minat Calon Pembeli. JMTS: Jurnal Mitra Teknik Sipil. Vol 6. No 4. Hal : 973-982

Ricky I. P., Sunardi & Riky D. P. (2019). PemantauanTegangan Baterai Lithium Polymerpada Robot Line Followersecara Nirkabel. Buletin Ilmiah Sarjana Teknik Elektro. Vol 01. No 02. Hal : 73-81

Yulianto A. R., Aisha Z., Amanda A. K. & Fadhila R. (2022). Mini Review: Wireless Charging Sebagai Inovasi Pengembangan Teknologi Elektromagnetik Dalam Menuju Era Society 5.0. Edufisika: Jurnal Pendidikan Fisika. Vol 7. No 2. Hal : 138-146

Rayhan F. S., Rizky P & Indah P. H. (2024). Internet Of Things Dalam Smart Vertical Garden Dengan Fuzzy Logic Method. JIKA (Jurnal Informatika) Universitas Muhammadiyah Tangerang. Vol 8. No 4. Hal : 456-465

Calvin W., Priansus R. R. & Silvia M. N. (2024). Rancang Bangun Sistem Monitoring Pengisian Daya Baterai 48 Volt 12 Ah Terintegrasi Internet Of Things. Jurnal Teknologi Rekayasa Instalasi Listrik. Vol 1. No 2. Hal : 22-28

Wildan C. B., Muladi & I Made W. (2023). Sistem Pengisian Baterai Sepeda Listrik Berbasis Internet Of Things. eMITOR: Jurnal Teknik Elektro. Vol 23. No 1. Hal : 23-30

Texas Instruments. (2015). Zero-Drift, Bi-Directional Current Power Monitor with I2C Interface Datasheet (Rev. G). Texas: Texas Instruments Inc.

Aprilia C. L. F. & Ary B. K. P. (2016). Studi Eksperimen Pengaruh Panjang Pipa Kapiler dan Variasi Beban Pendinginan pada Sistem Refrigerasi Cascade. Jurnal Teknik ITS. Vol 5. No 2. Hal : 593-598

Dias S., Mudofar B. & Erfan S. (2022). Rancang Bangun Sistem Absensi Menggunakan RFID Berbasis Web. Mestro Jurnal. Vol 4. No 01. Hal : 25-31

Marina A., Aidah N. R., Edwinanto & Anggy P. J. (2020). Aplikasi Smart Home Node MCU IoT Untuk Blynk. Jurnal Rekayasa Teknologi Nusa Putra. Vol 7. No 1. Hal : 1-7

Unduhan

Diterbitkan

2025-04-30

Terbitan

Vol 9 No 2 (2025): JIKA (Jurnal Informatika)

Bagian

Articles

Lisensi

License and Copyright Agreement

In submitting the manuscript to the journal, the authors certify that:

  • They are authorized by their co-authors to enter into these arrangements.
  • That it is not under consideration for publication elsewhere,
  • That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  • They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  • They agree to the following license and copyright agreement.

Copyright

Authors who publish with International Journal of Advances in Intelligent Informatics agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Licensing for Data Publication

International Journal of Advances in Intelligent Informatics use a variety of waivers and licenses, that are specifically designed for and appropriate for the treatment of data:

Other data publishing licenses may be allowed as exceptions (subject to approval by the editor on a case-by-case basis) and should be justified with a written statement from the author, which will be published with the article.

Open Data and Software Publishing and Sharing

The journal strives to maximize the replicability of the research published in it. Authors are thus required to share all data, code or protocols underlying the research reported in their articles. Exceptions are permitted but have to be justified in a written public statement accompanying the article.

Datasets and software should be deposited and permanently archived inappropriate, trusted, general, or domain-specific repositories (please consult http://service.re3data.org and/or software repositories such as GitHub, GitLab, Bioinformatics.org, or equivalent). The associated persistent identifiers (e.g. DOI, or others) of the dataset(s) must be included in the data or software resources section of the article. Reference(s) to datasets and software should also be included in the reference list of the article with DOIs (where available). Where no domain-specific data repository exists, authors should deposit their datasets in a general repository such as ZENODO, Dryad, Dataverse, or others.

Small data may also be published as data files or packages supplementary to a research article, however, the authors should prefer in all cases a deposition in data repositories.