Implementasi Human Machine Interface pada Mesin Heel Lasting Chin Ei Berbasis Programmable Logic Controller (Implementation of Human Machine Interface on Chin Ei's Heel Lasting Machine Based on Programmable Logic Controller)

Sumardi Sadi

Abstract


Human Machine Interface (HMI) adalah perangkat lunak antarmuka yang menjadi penghubung antara manusia dan mesin atau proses. Sistem proses yang otomatis tanpa HMI menyulitkan operator untuk mengetahui keadaan proses dan melaksanakan langkah-langkah segera untuk mengatasi setiap penyimpangan. Pada penelitian ini, HMI dibuat untuk sistem toe-lasting Yih-hong. Tahap pengembangan HMI pada personal computer meliputi; teknik antarmuka pengguna secara grafis, pemrograman HMI dengan menetapkan tag elemen layar, integrasi ke dalam perangkat PLC menggunakan CX Programmer dan CX-Designer, dan uji coba HMI terhadap sistem toe lasting Yih-hong. Hasil pembuatan HMI berupa visualisasi secara grafis di layar komputer tentang sistem heel lasting Chin Ei, status peralatan, dan variabel proses. Dalam penelitian ini menggunakan metode percobaan. HMI ini dibuat dengan tujuan, operator dapat menjalankan dan menghentikan sistem pengolah serta mengatur parameter pengendalian. Pembuatan HMI pada sistem ini, membuat pengoperasian tombol-tombol operasi mesin untuk pengolahan sistem Mesin Heel Lasting Chin Ei menjadi sangat mudah, efisien, efektif dan menyenangkan.

Human Machine Interface (HMI) is a software interface that connects humans and machines or processes. The automated process system without HMI makes it difficult for the operator to know the state of the process and carry out immediate steps to resolve any irregularities. In this research, HMI was created for Yih-hong's toe-lasting system. The stages of developing HMI on a personal computer include; graphical user interface engineering, HMI programming by assigning screen element tags, integration into PLC devices using the CX Programmer and CX-Designer, and HMI testing of Yih-hong's toe lasting system. The result of making HMI is in the form of graphic visualization on a computer screen about Chin Ei's heel lasting system, equipment status, and process variables. In this study using an experimental method. This HMI was made with the aim, the operator can start and stop the processing system and set control parameters. Making HMI on this system, makes the operation of the machine operation buttons for the processing of the Chin Ei Heel Lasting Machine system very easy, efficient, effective and fun.


Full Text:

PDF

References


Sumardi Sadi, “Rancang Bangun Monitoring Ketinggian Air dan Sistem Kontrol pada Pintu Air Berbasis Arduino dan SMS Gateway,” J. Tek., vol. 7, no. 1, pp. 77–91, 2018.

S. Sadi and Y. Mulya, “Sistem Keamanan Buka Tutup Kunci Brankas Menggunakan Bluetooth HC – 05 Berbais Arduino Mega 2560,” J. Tek., vol. 6, no. 2, pp. 99–105, 2017.

S. Sadi and S. Mulyati, “Rancang Bangun Kontrol Penerangan Rumah Menggunakan Media Bluetooth (Design Of House Lighting Control Using Bluetooth),” vol. 8, no. 2, 2019.

S. Sadi and S. Mulyati, “Automatic Transfer Switch ( ATS ) Base On Programmable Logic Controller CPM1A,” J. Tek., vol. 8, no. 1, pp. 84–89, 2019.

H. Ashour, “Automatic Transfer Switch ( ATS ) Using Programmable Logic Controller ( PLC ).”

S. Sadi, S. Mulyati, and D. A. Kurniawan, “Items ’ Filling System Prototype with Sorting System According to the Color and Height of the Conveyors based on PLC Omron CPE1E,” pp. 869–880, 2018.

A. Saefullah, S. Sadi, and Y. Bayana, “Smart Wheeled Robotic ( SWR ) Yang Mampu Menghindari Rintangan Secara Otomatis,” CCIT, vol. 2, no. 40, pp. 314–335, 2009.

S. Mulyati and Sumardi, “IoT on Door Security Control Prototypes based RFID and Bluetooth,” J. Tek., vol. 8, no. 1, pp. 11–16, 2019.

D. Julianto, “PERANCANGAN OTOMATISASI PINTU PADA SHELTER BUSWAY DENGAN MIKROKONTROLER AT89S51,” no. 021, 2010.

S. Mulyati and S. Sadi, “Gerbang Tertutup dan Terbuka pada Handphone Android Menggunakan Bluetooth,” vol. 12, no. 2, pp. 122–130, 2019.

S. Sadi, “Prototype System Control Car Garage Based Microcontroller ATMEGA 8535,” Comput. Eng. Intell. Syst., vol. 6, no. 4, pp. 91–108, 2015.

S. R. I. Mulyati, “INTERNET OF THINGS ( IoT ) PADA PROTOTIPE PENDETEKSI KEBOCORAN GAS BERBASIS MQ-2 dan SIM800L,” vol. 7, no. 2, 2018.

S. Mulyati, Z. Mubarok, E. Engineering, S. Program, and I. S. Program, “DESIGN OF SEPARATION METAL AND NON-METAL GOODS BASED ON CP1E-E30SDR-A AND PNEUMATIC Page No : 1296,” vol. IX, no. Ii, pp. 1296–1311, 2019.

P. Studi, T. Mesin, and F. Teknik, “BERBASIS MIKROKONTROLER ATMEGA8535.”

L. M. D. Pir, “Kontrol Pendingin Ruangan ( Fan ) dengan Logika Fuzzy Menggunakan Atmega 8535 ,” vol. 2, no. 2, pp. 94–105, 2016.

S. Sadi and S. Mulyati, “MONITORING SUHU RUANGAN MENGGUNAKAN MODUL HC 05 BERBASIS ANDROID,” J. Tek., vol. 8, no. 2, pp. 50–55, 2019.

S. Sadi, “Room Temperature Control System Prototype Industry Based Programmable Logic Controller Zelio SR2 B121 BD,” no. February, 2015.

J. Teknik, “Lisa Fitriani Ishak, MT., dkk.,” vol. 4, no. 1, 2015.

S. Sadi, “Rancang Bangun Sistem Pengendalian Kecepatan Motor DC Dengan Perantara Gelombang FM.”

Sumardi, S. H. Wisudo, W. Mawardi, and M. S. Baskoro, “Light Intensity PWM Design as a Tool to Attract Fish in Microcontroller-Based Stationary Lift Net,” Int. J. Eng. Sci. Invent., vol. 8, no. 03, pp. 75–82, 2019.

Sumardi, S. Hari Wisudo, W. Mawardi, and M. S. Baskoro, “50 Watta HPL Light Intensity Based On Forward Current As A Basis In Constraction Design Of Fish Attractor Device,” Univ. Muhammadiyah Tangerang, vol. 7, no. 1, pp. 100–106, 2018.

Sumardi, S. H. Wisudo, W. Mawardi, and M. S. Baskoro, “The Implementation Of The RGB Lamp Spectrum on The Fish Behavior In The Lift-Net Fishery,” Int. J. Sci. Eng. Res., vol. 10, no. 3, pp. 352–360, 2019.

Sugandi, R. I. Wahju, M. Riyanto, and Sumardi, “journal homepage: http://ojs.omniakuatika.net,” Omni-Akuatika, vol. 15, no. 1, pp. 103–109, 2019.

R. Faikar and B. Setiyono, “PERANCANGAN SISTEM ANTARMUKA BERBASIS HMI ( HUMAN MACHINE INTERFACE ) PADA MESIN YARN CONDITIONING PLANT DI PT . APAC INTI CORPORA,” TRANSIENT, vol. 4, no. 3, pp. 2302–9927, 2015.

A. S. Helmi and A. Triwiyatno, “PERANCANGAN SISTEM ANTARMUKA BERBASIS HMI ( HUMAN MACHINE INTERFACE ) PADA PURWARUPA FILLING BOTTLE AND CAPPING MACHINE UNTUK PENGEMASAN SUSU.”

M. A. Azis and A. Triwiyatno, “PERANCANGAN SISTEM ANTARMUKA BERBASIS HMI ( HUMAN MACHINE INTERFACE ) PADA MODEL PLANT AUTO COWFEEDER MACHINE.”

E. Adriono and B. Setiyono, “( HUMAN MACHINE INTERFACE ) PADA MESIN AUTO BALLPRESS PLANT DI PT . APAC INTI CORPORA,” TRANSIENT, vol. 4, no. 3, pp. 1–8, 2015.

Y. V Aruna and S. Beena, “Automatic convey or System with In – Process Sorting Mechanism using PLC and HMI System,” Int. J. Eng. Res. Appl., vol. 5, no. 11, pp. 37–42, 2015.

S. R. Adrian, D. Nataliana, U. A. L. I. Albayumi, I. Teknologi, and N. Bandung, “Prototype Synopsis Page pada Model Landing Gear System Pesawat Terbang dengan Kontrol PLCmikro PIC16F877A dan Aplikasi HMI Stampplot,” J. Reka Elkomika, vol. 2, no. 3, pp. 211–226, 2014.

M. C. Adib and M. Sukmawidjaja, “Rancang Bangun Pengendalian Alat Vacuum Pressure Impregnation Berbasis Plc Dan Hmi Untuk Gulungan Baru Mesin Listrik,” JETRI, vol. 14, no. 1, pp. 89–102, 2016.

I. Saputra, L. Hakim, S. R. S, and A. S. Kendali, “Perancangan Water Level Control Menggunakan PLC Omron Sysmac C200H Yang Dilengkapi Software SCADA Wonderware InTouch 10 . 5,” 2013.

S. Mulyati, Z. Mubarok, E. Engineering, S. Program, and I. S. Program, “Design Of Separation Metal And Non-Metal Goods Based On CP1E-E30SDR-A And Pneumatic,” Int. J. Manag. Technol. Eng., vol. IX, no. Ii, pp. 1296–1311, 2019.

F. Romi, A. Mubarok, T. Sukmadi, and A. Nugroho, “RANCANG BANGUN MODUL PERANGKAT KERAS KONVEYOR BERBASIS PROGRAMMABLE LOGIC CONTROLLER,” TRANSIENT, vol. 2, no. 4, pp. 2–7, 2013.

S. Sadi, “Room Temperature Control System Prototype Industry Based Programmable Logic Controller Zelio SR2 B121 BD,” Innov. Syst. Des. Eng., vol. 6, no. 4, pp. 52–69, 2015.

S. Sadi, S. Mulyati, and D. A. Kurniawan, “Items’ Filling System Prototype with Sorting System According to the Color and Height of the Conveyors based on PLC Omron CPE1E,” Int. Res. J. Eng. Technol., vol. 5, no. 11, pp. 869–880, 2018.

S. Mulyati, Z. Mubarok, E. Engineering, S. Program, and I. S. Program, “DESIGN OF SEPARATION METAL AND NON-METAL GOODS BASED ON CP1E-E30SDR-A AND PNEUMATIC Page No : 1296,” Int. J. Manag. Technol. Eng., vol. IX, no. Ii, pp. 1296–1311, 2019.




DOI: http://dx.doi.org/10.31000/jt.v9i1.2561

Article Metrics

Abstract - 6083 PDF - 4530

Refbacks

  • There are currently no refbacks.