PENGARUH KARAKTERISTIK KUAT TEKAN BETON MENGGUNAKAN SERBUK KAYU PADA CAMPURAN BETON

Sempurna Bangun, Kristina Sembiring

Abstract



Concrete is one of the fastest building materials in today's development. Developments in the development sector have triggered high demand which has an effect on increasing productivity in today's construction world, so that manufacturers want to create new innovations. Therefore, research related to efforts to improve concrete quality is necessary. The basic ingredients of concrete are cement, sand, gravel and water. This study uses the type of cement, namely the type of cement PCC (Portland Cement Composite) in a concrete mixture and its effect on the quality of the concrete. In the development of concrete, no research is often carried out on the use of sawdust for concrete. One of the sawdust that can be used as for concrete mixtures that are natural and environmentally friendly is sawdust. The purpose of this study was to determine the effect of adding sawdust. The time in this study for 35 days was tested for concrete aged 7, 28, and 35. In order to achieve the stated goals, this research has stages that must be carried out. The tests carried out were testing the constituent materials of concrete including fine aggregate and coarse aggregate, as well as testing the compressive strength of this study adding sawdust to the concrete mixture. From this study, the compressive strength value of the use of two types of cement is lower than normal concrete for the compressive strength value, for the strength value. The addition of sawdust increases the compressive strength and flexural strength values in concrete from the addition of 10% and 20% sawdust.


Keywords


Concrete, the compressive strength, flexural strength

References


http://eprints.polsri.ac.id/1220/3/M.Ali%20Indra%20Hafiz%20dan%20Septiawa n%20-Bab%202-word.pdf

Boni, L. O. M. I., Nasrul, & Talanipa, R. (2019). Pemanfaatan limbah gergaji sebagai bahan subtitusi pasir sabulakoa terhadap campuran mortar. STABILITA, 7(1), 31–38.

Siswadi, Rapa, A., & Puspitasari, D. (2007). Pengaruh penambahan serbuk kayu sisa penggergajian terhadap kuat desak beton. Teknik Sipil, 7(2), 144–

Mulyono, Tri. 2004. Teknologi Beton.

Yogyakarta : ANDI

Badan Standarisasi Nasional, SNI 1972:2008 : Cara Uji Slump Beton, Jakarta, 2008.

Paulus Civil Engineering Journal Volume 2 No.1. Maret 2020 Karakteristik Beton Mutu Tinggi dengan Substitusi Serbuk kayu pada Campuran Beton.

ASTM, Annual Book of ASTM Standart Volume 04.02. 2001 Concrete and Aggregates

Gargulak, J.D., Bushar, L.L. & Sengupta,

A.K. 2001. Ammoxidized

lignosulfonate cement dispersant, USPatent: US 6,238,475 B1.

Indra, Tjondro dan Handoko Sugiharto.2013.Pemanfaatan Abu Limbah Gergaji Kayu Sebagai Campuran Pembuatan Beton Surabaya: Universitas Kristen Petra.

Muin, Abd. dan Suryati.2013. Korelasi Antara Porositas Terhadap Kuat Tekan Beton.

Nugraha, P. dan Antoni. 2007. Teknologi Beton. Penerbit ANDI. Yogyakarta

Saifuddin, Edison dan Khairul Fahmi.2014.Pengaruh Penambahan Campuran.

SNI-03-2834-200. 2000 Tata Cara

Pembuatan Rencana Beton Normal. Badan Standarisasi Nasional. Bandung.

SNI-2847-2013. Persyaratan Beton Struktural untuk Bangunan Gedung. Badan Standariasi Nasional, Bandung.




DOI: http://dx.doi.org/10.31000/jt.v11i2.6660

Article Metrics

Abstract - 765 PDF - 348 Remote (Bahasa Indonesia) - 198

Refbacks

  • There are currently no refbacks.


License URL: https://scholar.google.co.id/citations?user=RJRfBN0AAAAJ&hl=id&authuser=2