SISTEM MONITORING SUHU DAN KELEMBAPAN INCUBATOR LABI-LABI BERBASIS IOT

Penulis

DOI:

https://doi.org/10.31000/jte.v6i2.9777

Abstrak

Labi-labi or softshell turtles (Testudines; Trionychidae) is a group of freshwater turtles. Fisheries statistics have recorded freshwater turtles as one of the fishery commodities since the 1990s. In maintaining the labi population, cultivation is needed, a little bit of cultivation due to the small number of hatching manually, to facilitate cultivation, monitoring and monitoring data from time to time nominal value of the temperature and humidity of the hatchery incubator, an IoT-based turtle incubator temperature and humidity monitoring tool was made. This tool consists of ESP8266, MIST MAKER, LCD, RELAY, Fan, Power Supply, Smartphone, and 3 sensors, namely DHT11 sensor, SOIL MOISTURE sensor, DS18B20 sensor as a zone reading area from the sensor and then will be connected to the Blynk application. 3 sensors, will send input humidity and temperature data to ESP8266, from ESP8266 then the data will be processed and sent and displayed to the Blynk application via the internet network. From this tool, the largest error value is 0.6, and the largest standard deviation is 0.085, so that the data error rate or tolerance of 0.5494% is obtained.

Keyword : Temperature and humidity, ESP8266, Soil Moisture, Blynk

Biografi Penulis

  • Andri Susanto, Universitas Muhammadiyah Tangerang
    Teknik Elektro

Referensi

Hasrullah. (2021). Rancang Bangun Instrumen Pengukur Tingkat Warna Putih Garam Industri. Ic, 11–13. https://eprints.umm.ac.id/73866/

Heckman, J. J., Pinto, R., & Savelyev, P. A. (1967). Spesifikasi Raspberry Pi. Angewandte Chemie International Edition, 6(11), 951–952., 5–41.

Kerja, C., Manfaat, D. A. N., & Kurniawan, A. (2009). SEJARAH , CARA KERJA DAN MANFAAT INTERNET OF THINGS. 36–41.

N Priyono. (2017). Laporan Proyek Akhir System Peringatan Dini Banjir Berbasis Protocol MQTT Menggunakan NODEMCU ESP8266. Elektronika, 3. https://eprints.utdi.ac.id/4913/3/3_143310004_BAB_II.pdf

Nugroho, H. A. (2019). Monitoring Alat Penetas Telur Dengan Android Berbasis Iot. Thesis (Diploma), STMIK AKAKOM YOGYAKARTA.

Oktaviani, D., Andayani, N., Kusrini, M. D., & Nugroho, D. (2017). Identifikasi Dan Distribusi Jenis Labi-Labi (Famili: Trionychidae) Di Sumatera Selatan. Jurnal Penelitian Perikanan Indonesia, 14(2), 145. https://doi.org/10.15578/jppi.14.2.2008.145-157

Permana, A. A., Perdana, A. T., Handayani, N., & Destriana, R. (2021, March). A Stunting Prevention Application “Nutrimoâ€(Nutrition Monitoring). In Journal of Physics: Conference Series (Vol. 1844, No. 1, p. 012023). IOP Publishing.

Pineng, M. (2021). Monitoring Kelembaban Tanah Pada Persemaian Bibit Tanaman Berbasis Arduino. Infinity, X, 1–6. https://doi.org/10.34148/infinity.v9i1.xxx

Sagita, M. (2015). Senyawa Semikonduktor yang digunakan untuk menghasilkan variasi warna pada LED. 5–32.

Santoso, H., Hestirianoto, T., & Jaya, I. (2021). Sand temperature and moisture monitoring system for turtle nests using Arduino Uno. Jurnal Teknologi Dan Sistem Komputer, 9(1), 8–14. https://doi.org/10.14710/jtsiskom.2020.13725

Sciences, H. (2016). 2.1 Pengertian PCB ( Printed Circuit Board ). 4(1), 1–23.

Selatan, S. (2015). LABI – LABI ( Amyda cartilaginea ) DI SUMATERA SELATAN. 15–19.

Sukamto, P. (2019). Bab II Landasan Teori. Journal of Chemical Information and Modeling, 53(9), 1689–1699.

Suyadnya, I. M. A., Agung, I. G., & Raka, P. (2018). Sistem Monitoring Penetasan Telur Penyu Menggunakan Mikrokontroler NodeMCU ESP8266 dan Protokol MQTT dengan Notifikasi Berbasis Telegram Messenger. 2(2), 80–89.

Tricahyandaru, F. (1998). Bab ii dasar teori 2.1. Pengaruh Perlakuan Panas Dan Penuaan, 5–18.

Uno, A. (2022). SISTEM MONITORING SUHU MESIN PENETASAN TELUR. 12(2).

Utami dan Hidayat. (2018). Relay & Arduino. Journal of Chemical Information and Modeling, 53(9), 8–24.

Vol 6 No.2

Unduhan

Diterbitkan

2022-09-02

Terbitan

Vol 6 No 2 (2022): JURNAL TEKNIK ELEKTRO

Bagian

Articles

Lisensi

The conditions that must be fulfilled by the author are as follows:

    1. The author retains copyright and grants the journal the right of first publication of the manuscript simultaneously with the license below Creative Commons Attribution License which allows others to share the work with a statement of authorship of the work and initial publication in this journal.
    2. Authors may enter into separate additional contractual arrangements for the non-exclusive distribution of rich versions of journal publications (e.g. posting them to an institutional repository or publishing them in a book), with acknowledgment of their initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g. in institutional repositories or on their websites) before and during the submission process, as this can lead to productive exchange, as can earlier and greater citations of the published work. (cek Open Access Effects).