SISTEM KONTROL DAN MONITORING SMART GARDEN HOUSE BERBASIS IOT MENGGUNAKAN ESP8266 SERI-01 DAN ARDUINO UNO

Authors

  • Ilham Pratama UIniversitas Muhammadiyah Tangerang
  • Bayu Pornomo UIniversitas Muhammadiyah Tangerang
  • Arif Apriansyah

DOI:

https://doi.org/10.31000/jte.v8i1.13859

Keywords:

IOT, Smart Garden, ESP8266 Series-01, Arduino Uno, DHT11 Sensor.

Abstract

The development of IOT-based technology is currently being favored by many people because of the convenience offered by this technology. Many things can be done with this technology as long as it is still connected to the internet. Of course this will be very helpful for example to control and monitor the condition of a room online and realtime, to do that it is necessary to make a tool that can control and monitor the condition of a smart garden room because if it is done in a room then the condition can be controlled and monitored. Smart Garden prototype design is a solution to take the right action during extreme weather and reduce human error. The Internet of Things (IoT)-based Smart Garden prototype uses the ESP8266 Series-01 as the User Interface in the monitoring system and uses the Soil Moisture sensor as input for soil moisture conditions. Soil moisture conditions where the results of the process are sent through an automatic watering smartphone. Based on the test results obtained a result that the tool can work correctly in accordance with what is instructed. The interface has also worked well where the data displayed is in accordance with the conditions received and the delivery delay is not too long around 1 second.

References

Artiyasa, Marina, Aidah Nita Rostini, Edwinanto, and Anggy Pradifta Junfithrana. 2021. “Aplikasi Smart Home Node Mcu Iot Untuk Blynk.†Jurnal Rekayasa Teknologi Nusa Putra 7(1): 1–7.

Budi, Kabul Setiya, and Yudhiakto Pramudya. 2017. “Pengembangan Sistem Akuisisi Data Kelembaban Dan Suhu Dengan Menggunakan Sensor Dht11 Dan Arduino Berbasis Iot.†VI: SNF2017-CIP-47-SNF2017-CIP-54.

Datasheet, English. 2004. “ESP8266 Serial Esp-01 WIFI Wireless.†ESP8266 Serial Esp-01 WIFI Wireless: 12. https://github.com/esp8266/esp8266-wiki/wiki/Uploading.

Fitriandi, A, E Komalasari, and H Gusmedi. 2016. “Rancang Bangun Alat Monitoring Arus Dan Tegangan Berbeasis Mikrokontroler.†Jurnal Rekayasa dan Teknologi Elektro 10(2).

Jupita, Riska et al. 2021. “Otomatisasi Penyiraman Tanaman Dengan Sensor Soil Moisture.†Jurnal Portal Data 7(2): 1–12. http://portaldata.org/index.php/portaldata/article/view/29.

Kurnia AR, Harlan. 2023. “Perancangan Robot Tank Yang Dikontrol Dengan Bluetooth Dan Dilengkapi Dengan Sensor Suhu Sebagai Media Pembelajaran.†JATI (Jurnal Mahasiswa Teknik Informatika) 7(2): 1082–86.

Lubis, Herdian Rizaldy. 2020. “Rancang Bangun Smart System Ruang Greenhouse.†Universitas Islam Indonesia: 32. https://dspace.uii.ac.id/bitstream/handle/123456789/28275/16524105 Herdian Rizaldy Lubis.pdf?sequence=1.

Sambath, M., M. Prasant, N. Bhargav Raghava, and S. Jagadeesh. 2019. “Iot Based Garden Monitoring System.†Journal of Physics: Conference Series 1362(1).

Simanjuntak, Maratur Gabe. 2013. “Perancangan Prototipe Smart Building Berbasis Arduino UNO.†Singuda Ensikom 2(2): 6–31.

Tentang, Sekilas, and Iot Internet. 2023. “ARDUINO Kit IoT ‘ Smart Garden .’†2023.

Xun, Yi, and Guangpei Ren. 2022. “Smart Garden Planning and Design Based on the Agricultural Internet of Things.†Computational Intelligence and Neuroscience 2022.

Downloads

Published

2025-04-26

Issue

Vol. 8 No. 1 (2024): JURNAL TEKNIK ELEKTRO

Section

Articles

License

The conditions that must be fulfilled by the author are as follows:

    1. The author retains copyright and grants the journal the right of first publication of the manuscript simultaneously with the license below Creative Commons Attribution License which allows others to share the work with a statement of authorship of the work and initial publication in this journal.
    2. Authors may enter into separate additional contractual arrangements for the non-exclusive distribution of rich versions of journal publications (e.g. posting them to an institutional repository or publishing them in a book), with acknowledgment of their initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g. in institutional repositories or on their websites) before and during the submission process, as this can lead to productive exchange, as can earlier and greater citations of the published work. (cek Open Access Effects).