PERANCANGAN DESAIN ALAT PEMBAKARAN SAMPAH RAMAH LINGKUNGAN

Authors

  • Mochamad Iqbal Purnama Politeknik TEDC Bandung
  • Agus Saleh

DOI:

https://doi.org/10.31000/mbjtm.v9i1.12329

Abstract

Abstract

In designing an environmentally friendly waste incineration device, it is important to consider the product life cycle comprehensively. This includes selecting environmentally friendly construction materials, such as recycled or biodegradable materials, as well as designing for ease of maintenance and upkeep to extend the lifespan of the device. Additionally, modular and adaptable design can allow for adaptation to different local needs and conditions. Environmentally friendly waste incineration device design should consider technical and practical concepts that can reduce negative impacts on the environment and human health. One key aspect is combustion efficiency, which can be achieved through the selection of advanced combustion technologies and proper control of temperature and airflow. Furthermore, reducing pollutant emissions such as hazardous particles, greenhouse gases, and toxic compounds should be a primary focus. This can be accomplished using effective exhaust gas filtration and purification technologies. In designing this device, it is important to consider social and economic aspects, including technology availability and accessibility, as well as operational and maintenance costs.

Keyword : Incinerator, Wate Incinerator, Environmentally Friendly.

References

Amin, M., Ananda, R., Muflih, H., & Arif, M. (2022). Pengenalan Teknologi Microcontroller Dengan Kompetensi Pembuatan Tong Sampah Pintar Pada Siswa Kelas XI SMKN 2 Tanjungbalai. Jurnal Pemberdayaan Sosial Dan Teknologi Masyarakat, 2(2), 175–180. http://jurnal.goretanpena.com/index.php/JPSTM

Dewi, A. P., Karimah, H. S., Rahmawati, L. A., Asharuddin, R., & Dewinggih, T. (2024). Pengelolaan Sampah Berbasis Teknologi: Incinerator Sebagai Solusi Pengolahan Sampah Di RW 16 Desa Cigugurgirang. Procedings UIN Sunan Gunung Djati Bandung, 5(7). https://proceedings.uinsgd.ac.id/index.php/Proceedings

Hamidah, N., Sinthia, C. F., & Anshori, M. I. (2023). Pengaplikasian Komposter Sampah Organik Untuk Pemenuhan Kebutuhan Pupuk di Desa Palengaan Dajah Kecamatan Palengaan Kabupaten Pamekasan. Communnity Development Journal, 4(4).

Muchlisinalahuddin, & Kesuma, D. S. (2020). Tempat Pembakaran Sampah Organik Ramah Lingkungan. Rang Teknik Journal, 3(1).

Novrio, M. F. (2024). Pembuatan Drying Conveyor Dengan Pemanfaatan Panas Insinerator Untuk Pembangkit Listrik Tenaga Sampah (PLTsa). Jurnal Serambi Engineering, IX(4), 10415–10421.

Ponisri, P., Syam, M. I., & Susena, P. R. (2019). Penanggulangan Dan Pengelolaan Sampah Di Lingkungan Sekolah. Abdimas: Papua Journal of Community Service, 1(1), 13–20. https://doi.org/10.33506/pjcs.v1i1.346

Prasetiyadi, Wiharja, & Wahyono, S. (2018). Teknologi Penanganan Emisi Gas dari Insinerator Sampah Kota. Teknologi Sistem… JRL, 11(2), 85–93.

Rasidi, A. I., Pasaribu, Y. A. H., Ziqri, A., & Adhinata, F. D. (2022). Klasifikasi Sampah Organik dan Non-Organik Menggunakan Convolutional Neural Network. Jurnal Teknik Informatika Dan Sistem Informasi, 8(1). https://doi.org/10.28932/jutisi.v8i1.4314

Rivai, A., Fausy, M., & Mulyadi. (2023). Penggunaan Alat Pembakaran Sampah Tanpa Asap Untuk Mengatasi Pencemaran Lingkungan. Jurnal Sulolipu, 23(1), 2023.

Sari, A., Iswati, S. R., Amirah, S. N., Cahyani, D. A., Nurrizkika, Y. A., Fourlina, H., Irhas, M., Dika, A. A., Pebrian, T., Lestari, N. M. D. A. A., & Murniati, M. (2023). Pemanfaatan Drum Bekas Sebagai Bahan Pembuatan Tempat Sampah Bakar Di Desa Wajageseng. Jurnal Warta Desa (JWD), 5(2), 120–125. https://doi.org/10.29303/jwd.v5i2.260

Studyanto, A. B., Pratiwi, S. N., Ali, K. I., Mu’arrifa, M., Azkia, N. Z., Karim, N. M., Muhtar, S. A., Afifunnisa, S., & Sanjaya, K. (2022). Sosialisasi Pengelolaan Sampah dan Pengadaan Tempat Sampah di Desa Adiraja Kecamatan Adipala Kabupaten Cilacap. Prosiding Seminar Nasional UNIMUS.

Utami, A. P., Pane, N. N. A., & Hasibuan, A. (2023). Analisis Dampak Limbah/Sampah Rumah Tangga Terhadap Pencemaran Lingkungan Hidup. Cross-Border, 6(2), 1107–1112.

Wahyudi, J. (2019). Emisi Gas Rumah Kaca (GRK) dari Pembakaran Terbuka Sampah Rumah Tangga Menggunakan Model IPCC. Jurnal Litbang, XV(1), 65–76.

Wijaya, K. W., Marno, & Dirja, I. (2024). Pembuatan dan Pengujian Mesin Press Sampah Untuk Pembangkit Listrik Tenaga Sampah (PLTSA) Di Kampus UNSIKA. IX(4).

Downloads

Published

2025-01-31

Issue

Vol. 9 No. 1 (2025): Motor Bakar: Jurnal Teknik Mesin

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms