STUDI NUMERIK PENGARUH EXTERNAL FORCE TERHADAP KEKUATAN POROS POMPA SENTRIFUGAL JENIS N 32–125
DOI:
https://doi.org/10.31000/mbjtm.v9i1.13185Keywords:
Kata kunci, Poros, Von Mises, Displacement, Strain.Abstract
Abstrak
Pompa adalah mesin yang berfungsi untuk memindahkan fluida dengan cara merubah energi mekanis menjadi energi fluida dan tekanan, mengangkut fluida melalui sistem perpipaan. Keandalan dan kekuatan poros pompa sentrifugal menjadi perhatian utama pada penelitian ini. Penelitian tentang pengaruh besaran force yang bekerja pada poros pompa sentrifugal terhadap kekuatan poros pompa sentrifugal dengan metoda numerik Finite Element Method (FEM) dilakukan dengan menggunakan aplikasi komputer Solidworks simulation. Besaran force yang bekerja pada poros pompa sentrifugal dengan material baja AISI 1020 sebesar 50 N, 75 N, dan 100 N di usulkan. Hasil penelitian menunjukkan bahwa poros pompa sentrifugal memiliki nilai tegangan von Mises, displacement, dan strain yang tinggi seiring ditingkatkannya force yang bekerja. Hasil ini diharapkan dapat digunakan untuk referensi perancangan poros pompa sentrifugal dan dapat diterapkan untuk mempertimbangkan faktor kemanan pada poros pompa sentrifugal di lapangan.
Â
References
Daftar Pustaka
M. Safi’i, R. Muhammad, N. B. Jannati, 2024. “Analisa Kerusakan Pompa Oli Temperature Control Unit pada Mesin Longitudinal Strecher ditinjau dari Kerugian Biaya Produksi di PT. Polidayaguna Perkasa Ungaranâ€. STORAGE – Jurnal Ilmiah Teknik dan Ilmu Komputer, Vol. 3, No. 1, PP. 106 – 115.
X. Su, Q. Xu, C. Yang, X. Dai, L. Guo, 2024. “Numerical Study of Gas Pocket Distribution and Pressurization Deterioration Mechanism in a Centrifugal Pumpâ€. Progress in Nuclear Energy. Vol. 177, No. 2, PP. 1-13.
Zhang, L., Tang, L., Wen, Q., & Luo, W, 2022. “Study on Optimization of Pump Shaft Transmission System of Plastic Centrifugal Pumpâ€. Journal of Engineering, Vol 11. No. 1, PP. 1-14.
K. H. Wu, B. J. Lin, and C. I. Hung, “Novel design of centrifugal pump impellers using generated machining method and CFD,†Engineering Applications of Computational Fluid Mechanics, Vol. 2, No. 2, PP. 195–207, 2014.
Y. Xiao, Z. Sun, G. Sun, L. Wan, 2024. “Numerical Study on Dynamic Response of Double Drive Shafts of Dual-Coupled Axial Piston Pump Under Various Load Ratiosâ€. Engineering Failure Analysis. Vol. 163, No. 2, PP. 1-14.
F. Bendt, V. A. Bennekom, 2021†Pump Shaft Failures a Compendium of Case Studiesâ€, Engineering Failure Analysis, Vol 140, No. 2, PP. 135-144.
Y. H. Anoi, F. L. Fenriyati, Irianto, A. Yani, 2022. “Studi Eksperimental Variasi Tekanan Masuk (Suction Preasure) Terhadap Kinerja Pompa Air Sentrifugal Pada Alat Praktikum Mesin Fluida Stti Bontangâ€. Jurnal Taguchi. Vol. 2, No. 2, PP. 238-248.
D., Taylor, 2002. “Prediction Of Fatigue Failure Location on a Component Using a Critical Distance Methodâ€. International Journal Fatigue, Vol. 22, No. PP. 735-742.
A. Goksenli, I. B. Eryurek, 2009. “Failure Analysis of an Elevator Drive Shaftâ€. Engineering Failure Analysis, Vol. 16, No. 4, PP. 1001-1009.
N. Parida , S. Tarafder, S. K. Das, P. Kumar, G. Das, V. R. Ranganath, D. K. Bhattacharya, 2003. “Failure Analysis of Coal Pulverizer Mill Shaftâ€. Engineering Failure Analysis. Vol. 10, No. 6, PP. 733-744.
H. Kuang, 1996. “Deformation of Materials Under External Forcesâ€. Journal of Materials Science. Vol. 31, No. 12, PP. 3201-3210.
N. F. Nelfandi, A. R. Saleh, F. Hilmy, 2023. “Analisis Kegagalan Pada Poros Pompa Sentrifugal 107 Ja Menggunakan Meh (Metode Elemen Hingga) Di PT. PETROKIMIA GRESIKâ€. PROSIDING SEMINAR NASIONAL RISET TEKNOLOGI TERAPAN – TEKNIK MESIN UNTIDAR. Vol. 3, No. 1, PP. 1-8.
Downloads
Additional Files
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License
YOU ARE FREE TO:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms
