Pengaruh Fluida Pendingin Terhadap Kapasitas Radiator Dan Efektifitas Absorbsi Panas Pada Mesin Toyota Avanza 1.3 G M/T

Hadi Kusnanto, Moh Arif Batutah

Abstract


The cooling system is an important part in an engine work cycle. The main purpose of the cooling system is to maintain the engine's working temperature to remain optimal and prevent overheating in the engine. Therefore, the researcher examines the variation of the cooling fluid on the radiator capacity and effectiveness of heat absorption and analyzes the radiator capacity based on the engine rpm and the effect of time on the capacity and effectiveness of heat absorption. This research is using experimental method. The testing process is carried out in stages and records the test results. The results of calculations and tests for the heat transfer rate (radiator capacity) are the highest on mineral water fluid, namely 810117 watts and the lowest on Super long life Coolant fluid, namely 170319.6 watts. While the test results for the effectiveness of radiator heat absorption which has a stable heat absorption effectiveness from the variation of the applied fluid is using Super long life Coolant fluid

Keywords


Cooling fluid, radiator capacity, radiator effectiveness

Full Text:

PDF

References


Agung, Dhanurendra Priambodo; Arsana, I Made. 2013. Pengaruh Temperatur Fluida Masuk Terhadap Kapasitas Penukar Panas Jenis Pembuluh Dan Kawat Pada Konveksi Bebas. Jurnal Teknik Mesin. Vol. 01 Nomor 02 (2013): hal. 80 – 85. Universitas Negeri Surabaya.

Ahmad, Fandi; Arsana, I Made. 2014. Perencanaan Sistem Aliran Fluida Pada Rancang Bangun Alat Penguji Kapasitas Radiator. Jurnal Rekayasa Mesin. Vol. 02 Nomor 01 (2014): hal. 48 – 54. Universitas Negeri Surabaya.

Arsana, I Made. 2016 “Pengaruh Jarak Antar Kawat Terhadap Efisiensi Penukar Panas Jenis Pembuluh Dan Kawat Konveksi Bebas”. Jurnal Penelitian Saintek, Vol. 21, Nomor 2, Oktober (2016): hal. 142 – 153.

Asep Ubaidillah 2008. Analisa Perpindahan Kalor Pada Pendingin Radiator Dari Motor Bakar Otto. Jakarta: Laporan Tugas Akhir Universitas Mercu Buana.

Choiril, Bagus; Arsana, I Made. 2015. Pengaruh Laju Aliran Massa Fluida Terhadap Kapasitas Oil Cooler Pada Sistem Pelumasan Sepeda Motor. Jurnal Teknik Mesin. Vol. 04 Nomor 01 (2015): hal. 1 – 5. Universitas Negeri Surabaya.

David Fraim, Frans P.Sappu, Tertius V.Y. 2015. Analisis efektifitas radiator pada mesin toyota kijang tipe 5 K. Jurnal Online Poros Teknik Mesin Volume 4 Nomor 2. Universitas Sam Ratulangi.

Edi Priyanto, Moh. Arif Batutah, 2017. Analisa Zat Aditif (FFI Power Booster) Terhadap Bahan Bakar dan Proses Pembakaran di Motor Empat Langkah. Seminar Nasional Teknik Industri Waluyo Jatmiko 2017, UPN Veteran Jawa Timur.

Fikri, Moch. Ubab Khunzul; Arsana, I Made. 2013. Pengaruh Laju Aliran Fluida Masuk Terhadap Kapasitas Penukar Panas Jenis Pembuluh Dan Kawat Pada Konveksi Bebas. Jurnal Teknik Mesin. Vol. 01 Nomor 02 (2013): hal. 71 – 79. Universitas Negeri Surabaya.

Holman, J.P. 2003. Perpindahan Kalor .Edisi Keenam. Alih Bahasa E. Jasfi. Jakarta:Erlangga.

Irwan Syahrir, Muslih Dwi Priyono, Moh Arif Batutah . 2025. Analisis Perbandingan Performa Bahan Bakar Shell Super dan Shell V-Power pada Motor Honda PCX 150 cc Tahun 2021. Journal of Manufacturing in Industrial Engineering & Technology. Halaman 24-32. 2024/6/30

Koestoer, Raldi Artono, dan Zulkfli, 1998, Perpindahan Kalor Konveksi, Laboratorium Perpindahan Kalor. Universitas Indonesia, Jakarta.

Kreith, Frank dan Prijono, A, 1986. Prinsip-prinsip perpindahan panas. Edisi Ketiga. Jakarta: Erlangga.

Moh Arif Batutah , 2025. Analisis Throttle Position Sensor (TPS) Standart dan Racing dengan Dua Variasi Bahan Bakar terhadap Kinerja Vario 125. Journal of Manufacturing in Industrial Engineering & Technology. Halaman 61-71. 2024/12/30

Moh Arif Batutah, Ahmat Muhaimin. 2019. Analisa Performa Bahan Bakar Minyak Premium dan Bahan Bakar Gas CNG pada Mesin Toyota Limo. Prosiding Seminar Nasional Teknologi Industri, Lingkungan dan Infrastruktur. Halaman C13. 1-C13. 7. 2019/11/12.

Moh Arif Batutah, Betty Ariani, Hadi Kusnanto, Ilyas Sofana, Irwan Syahrir, 2024. Variasi Busi terhadap Analisa Performa Mesin 4 Langkah, J-Proteksion: Jurnal Kajian Ilmiah dan Teknologi, hal 123-127. 2024/2/25.

Moh Arif Batutah, Duong Tuan Anh Nguyen. 2025. The Effect of Exhaust Emissions L, O2, CO, CO2 and Hydrocarbon for Performance of All New Ertiga Aatomotive. . International Journal of Mechanical Engineering Technologies and Applications. Page 48-57 . Vol. 6 No. 1 (2025)

Moh. Arif Batutah, 2022. Analisa Performa Bahan Bakar Pertalite Dan Pertamax Pada Mesin Honda Beat 110 CC. Vol 6, No 2 (2022), hal 67. KOMPUTEK, 2022

Saifullo Saifullo, Moh Arif Batutah, Anastas Rizaly, Ponidi Ponidi, Hadi Kusnanto, Ilyas Sofana. 2024. Analysis of Breaking System on Energy Saving Cars "SAKERA", Mechanical Engineering Work, UM Surabaya. International Journal of Mechanical Engineering Technologies and Applications. Page 1-11. Vol. 5 No. 1 (2024).




DOI: http://dx.doi.org/10.31000/mbjtm.v9i2.13662

Article Metrics

Abstract - 19 PDF - 0

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Hadi Kusnanto Kusnanto

Motor Bakar : Jurnal Teknik Mesin (ISSN: 2549-5038 e-ISSN: 2580-4979)

Copyright © 2017-2020 Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Tangerang. All rights reserved.


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License