ANALYSIS OF BRAKING SENSOR SYSTEM IN FLOUR PACKAGING TRANSPORT AT PT X

Authors

  • Yosua Davidson
  • Haris Abizar

DOI:

https://doi.org/10.31000/mbjtm.v10i1.16007

Keywords:

safety sensor system, 25 kg flour packaging transport, operational efficiency.

Abstract

This research aims to analyse the effectiveness and workings of the safety sensor system in the transportation of 25 kg flour packaging at PT X. The research method used is a case study with a qualitative approach through observation, interviews, and descriptive data analysis. The focus of the research includes the conveyance of the results of the 25 kg flour packing process and understanding the basic mechanisms and functions of the conveyor system with infrared sensors and PLC interlocks in the 25 kg flour packaging process to ensure safety and operational efficiency. The results show that the safety sensor system integrated with PLC plays an important role in detecting the presence of products, regulating the movement of the conveyor, and ensuring product safety from metal contamination. The interlock system enables real-time control and monitoring of the product transfer process, as well as providing alerts in case of problems. This research is expected to contribute to the logistics and food industry in improving product safety and quality through sensor system optimisation, monitoring system integration, early warning system development, regular evaluation and maintenance, and operator training.

 

References

F. I. Pasaribu, N. Evalina, M. N. A. Nasution, E. S. Nasution, and A. Amiruddin, “Perancangan sistem pengamanan pada jalan tanjakan dan turunan yang bertikungan,†in Prosiding Seminar Nasional Teknik UISU (SEMNASTEK), 2022, pp. 126–134.

S. Kasus, U. Coconut, and T. Indonesia, “Penerapan pengendalian kualitas terhadap produksi tepung kelapa ( desiccated coconut ) di pt. unicotin airmadidi,†2023.

J. H. cipta Pangaribuan, I. Gunawan, H. Satria T, . S., and I. O. Kirana, “Perancangan Alarm Anti Maling Pada Kendaraan Bermotor Dalam Posisi Parkir Menggunakan Sensor Pir (Passive Infrared Receiver) Dan Sensor Getar Berbasis Arduino Uno R3,†J. Ilm. Ilk. - Ilmu Komput. Inform., vol. 4, no. 1, pp. 26–35, 2021, doi: 10.47324/ilkominfo.v4i1.106.

D. Nurdiansyah, “Pengaruh kualitas produk dan harga terhadap keputusan pembelian produk sepatu olahraga merek Adidas di Bandar Lampung,†2017.

I. Ibrahim, D. Arifin, and A. Khairunnisa, “Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dengan Tahapan Dmaic Untuk Mengurangi Jumlah Cacat Pada Produk Vibrating Roller Compactor Di Pt. Sakai Indonesia,†J. Kalibr. Karya Lintas Ilmu Bid. Rekayasa Arsitektur, Sipil, Ind., vol. 3, no. 1, pp. 18–36, 2020, doi: 10.37721/kal.v3i1.639.

M. A. M. Martinus, Adi Susilo, Mareli Telaumbauna, “RANCANG BANGUN SISTEM PENGHITUNG JUMLAH DAN MASSA BIJI KOPI BERBASIS MIKROKONTROLER PADA KONVEYOR SABUK,†vol. 5, no. 2, pp. 267–271, 2020, doi: 10.1163/9789004325968_034.

H. Abizar, S. D. Ramdani, and D. Supriyatna, “Operator competency model for mechanical engineering expertise,†AIP Conf. Proc., vol. 2671, no. April, 2023, doi: 10.1063/5.0114532.

M. M. Tahir, Penanganan Pasca Panen Dan Produk Olahan Sayuran. Nas Media Pustaka, 2023.

W. E. Sari and S. Syahwin, “Prototipe Sistem Keamanan Brankas Berbasis Arduino menggunakan Android,†sudo J. Tek. Inform., vol. 1, no. 4, pp. 154–162, 2022, doi: 10.56211/sudo.v1i4.146.

E. K. Laksanawti, E. Efrizal, and D. A. Kusuma, “Perancangan Conveyor Pada Mesin Pembuat Mie Otomatis,†Mot. Bakar J. Tek. Mesin, vol. 5, no. 1, p. 28, 2022, doi: 10.31000/mbjtm.v5i1.5815.

K. Baehaki, “Integrasi hardware alat produksi biogas berbasis Internet of Things,†vol. 11, no. 6, pp. 6759–6763, 2024.

D. Assyakurrohim, D. Ikhram, R. A. Sirodj, and M. W. Afgani, “Metode studi kasus dalam penelitian kualitatif,†J. Pendidik. Sains Dan Komput., vol. 3, no. 01, pp. 1–9, 2023.

H. Wijaya, Analisis data kualitatif teori konsep dalam penelitian pendidikan. Sekolah Tinggi Theologia Jaffray, 2020.

S. Lutfianto, “Sistem Manufaktur Terpadu Proses Obat Nyamuk Semprot,†pp. 1–9, 2008.

A. Saputra, Helmizar, and Y. Witanto, “Perawatan Mesin Belt Conveyor,†Teknosia, vol. 18, no. 1, pp. 21–29, 2024, doi: 10.33369/teknosia.v18i1.34944.

Sigi Syah Wibowo, Abdul Manaf, and Tresna Umar, “Analisis Pembebanan Belt Conveyor Menggunakan Motor Induksi 3 Fase 1,5 Kw Dan Vsd Sebagai Speed Controller,†J. Tek. Ilmu Dan Apl., vol. 9, no. 1, pp. 91–96, 2021, doi: 10.33795/jtia.v9i1.18.

S. Sanam, I. A. Azpah, B. Bohari, H. Abdillah, and A. Y. W. Putra, “PENERAPAN SISTEM OTOMASI DALAM PEMBERIAN PAKAN IKAN LELE GUNA MENGEFISIENSI WAKTU,†Accurate J. Mech. Eng. Sci., vol. 5, no. 1, pp. 8–15, 2024.

D. Yuhendri, “Penggunaan PLC Sebagai Pengontrol Peralatan Building Automatis,†JET (Journal Electr. Technol., vol. 3, no. 3, pp. 121–127, 2018, [Online]. Available: https://jurnal.uisu.ac.id/index.php/jet/article/view/952

A. Androva and A. Mukhtar, “Rancang Bangun Instrumentasi Infrared Obstacle Avoidance Sensor Pada Dynamometer Prony Brake Dengan Sistem Monitoring Berbasis Iot (Internet Of Things),†Cross-border, vol. 6, no. 2, pp. 1081–1090, 2023.

S. Wilyanti, M. Manfaluthy, and K. Karseno, “Conveyor Control System Product Calculation Based On Programmable Logic Controller,†J. Tek., vol. 8, no. 2, 2019, doi: 10.31000/jt.v8i2.1489.

R. Maftuhah and H. Rafsanjani, “Pelatihan Strategi Pemasaran Melalui Media Online Pada Produk Usaha Rumahan Krupuk Bawang dan Kripik Sukun,†Aksiologiya J. Pengabdi. Kpd. Masy., vol. 3, no. 2, p. 227, 2019, doi: 10.30651/aks.v3i2.1996.

A. Wibowo, “Laporan Magang Di Pt . Pundi Kencana Flour Mills Cilegon,†pp. 1–95, 2010.

Additional Files

Published

2026-05-11

Issue

Vol. 10 No. 1 (2026): Motor Bakar: Jurnal Teknik Mesin

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms