Design of 2 Axis Loader and Conveyor Leaf Spring on Induction Heating Furnace Unit PT. XYZ

Authors

  • Vinsentius Bram Armunanto Politeknik ATMI Surakarta
  • Aditya Nugraha Politeknik ATMI Surakarta
  • Arif Kurniawan Politeknik ATMI Surakarta

DOI:

https://doi.org/10.31000/mbjtm.v7i2.9410

Keywords:

Loader, Conveyor, Leaf Spring, Heating Furnace

Abstract

The process of heating the furnace is heating the leaf spring material with an oven (induction heating furnace) at a temperature of 800-900°C for a certain time. The output from the induction heating furnace is further processed with yobimage (straightening which aims to keep the leaf spring material in the shape it demands after being processed by the tapper) on a straightening machine. The process from one unit to another requires tools to move materials automatically. The appropriate tool is a combination loader and conveyor because it has the ability to move with narrow spacing and is in accordance with the shape of the output and input of the machine.
The purpose of this study was to obtain design drawings and analyze factors (construction strength, tool dimensions and machine component calculations) in loader and conveyor design. The research process uses the Verein Deutsche Ingenieure 2222 (VDI 2222) method, designs are made in the form of 3D and 2D images using the help of Solidwork software. The research carried out resulted in a loader and conveyor unit design that was serves to move the leaf spring material from the induction heating furnace machine to the straightening machine according to the company's wishes. It is hoped that the results of the design can be realized and developed according to the needs of the company.

Keywords: Leaf spring, VDI 2222, loader and conveyor.

References

Artana, F. (2018). Rekalkulasi Daya dan Sistem Pendinginan pada Motor Diesel 4 Tak Multi Silinder Mitshubisi L300 2477cc (Doctoral dissertation, undip).

Hendriarto, C., Prasetyo, G., Widianto, A. N., Ariayanto, A., & Yulianto, T. S. (2020). Pemilihan Akuator Dan Motor Pada Arm Robot 6 Axis Plc Training Unit. IMDeC, 274-281.

Imron, M., & Setiawan, A. (2018). Pemilah Barang Logam Dan Non-Logam Berbasis Plc Omron Cp1E-N30Sdt-D. Jurnal Teknik Elektro, 1(1)

Jumriady, J., Sirajuddin, A. S., & Naharuddin, N. (2019). Perancangan Conveyor Berdasarkan Berat Berbasis Arduino. Jurnal Mekanikal, 10(2).

Junaidi, A. (2015). Rancang Bangun Modifikasi Pergerakkan Prototype Articulated Dan Bucket Dengan Menggunakan Pengendali Jarak Jauh Pada Wheel Loader. AUSTENIT, 7(2).

Madjid, N. Z., & Pradana, V. S. (2021). Perancangan Mesin Pemisah Debu dan Serpihan Material Plastik dari Plastik Gilingan dengan Menggunakan Metode VDI 2222. Surakarta: Politeknik ATMI Surakarta.

Furqani, I. (2022). Analisis Kekuatan Rangka Mesin Perontok PadiI Mengguna-kan SOLIDWORKS 2019. Sumatera barat: Universitas Muhammadiyah Sumatera Barat

McGuire, P. M. (2010). Conveyors. London: CRC Press.

Nugraha, A., Armunanto, V. B., & Kurniawan, D. A. (2023). Perancangan Unit Separator Hinge Lid Packer Machine Pt Djitoe Mesindo Batam. Jurnal Ilmiah Teknik Mesin, 11(1), 1-12.

Pahl, G., Beitz, W., Feldhusen, J., dan Grote, K.H. 2007. Engineering Design: A Systematic Approach. London : Springer.

Sarware, K., Namdeo, A., Dwivedi, A., Shukla, A., Soni, P., & Chaturvedi, V. (2020). Automated pick and throw robotic arm from Conveyer belt. Int. Res. J. Eng. Technol.(IRJET), 7(06), 2395-0072.

Supriyono, T., Tarigan, B., & Nurjaman, T. (2018). Failure Analysis On The Mini Pile Hammer. Prosiding SNTTM XVII, 12(1), 105-111.

Wijarnako, A. (2021). Desain Modifikasi Meja Conveyor Pada Lifter Untuk Mengurangi Beban Kerja Operator Pada Kelompok Kerja Sound Board Assy Gp Di Pt. Yamaha Indonesia.

Widyaningrum, D., & Andesta, D. (2022). Usulan Peningkatan Produktivitas Produk Leaf Spring Tipe Msm 2230 Dengan Metode Lean Manufacturing Di Pt. Indospring, Tbk. JUSTI (Jurnal Sistem dan Teknik Industri), 2(3), 431-439.

Downloads

Published

2023-11-10

Issue

Vol. 7 No. 2 (2023): Motor Bakar: Jurnal Teknik Mesin

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms