RANCANG BANGUN SUPPORTING AND SAFETY EQUIPMENT PADA MESIN ROBOT DRAWING HYBRID LASER

Penulis

DOI:

https://doi.org/10.31000/mbjtm.v4i1.5707

Kata Kunci:

Rancang Bangun, Supporting Equipment, Safety, Robot Drawing Hybrid Laser, Autodesk Inventor

Abstrak

Penggunaan teknologi laser sebagai marking pada alat-alat rumah tangga maupun industri mengalami peningkatan yang cukup signifikan. Dengan berlatar belakang hal tersebut saya dan tim menyusun sebuah karya tulis yang membahas tentang laser dan grafir khususnya mengenai komponen pendukung atau supporting equipment mesin ini. Penelitian yang sifatnya rancang bangun ini bertujuan agar pembaca dapat memahami proses perancangan desain hingga fabrikasi serta analisis dari komponen pendukung mesin Robot drawing hybrid laser. Penelitian ini menggunakan metode studi literatur, observasi, perancangan desain, fabrikasi dan analisis hasil. Observasi ditekankan pada pengukuran dan pengkajian mesin utama Robot drawing hybrid laser. Perancangan desain dibantu oleh software pendukung yaitu Autodesk Inventor dan Autocad. Fabrikasi meliputi proses cutting, setting, welding dan finishing. Output penelitian ini berupa sebuah perangkat mesin yang siap untuk dioperasikan lengkap dengan komponen pendukungnya berupa meja kerja, safety cover, dan papan instruksi. Ketika mengoperasikan mesin ini operator akan merasa nyaman sehingga produktivitasnya pun tinggi.

Referensi

Diki Muhamad Sobirin, Jana Utama. Perancangan Sistem Multi Computer Numerical Control (CNC) Untuk Plotter Dan Laser Engraving. Jurnal Sistem Komputer, Universitas Komputer Indonesia, 2020.

Djamiko, Riswan Dwi. 2008. Teori Pengelasan Logam. Yogyakarta: UNY

Hafiz Ramadhani, Syafri. Perancangan Dan Analisis Struktur Mekanik Prototipe Laser Cutting. Jom FTEKNIK Volume 5 No.1 April 2018.

Haq, Saiful. Dkk. 2020. Buku Pedoman Penulisan Praktek. Tangerang: Fakultas Teknik UMT

http://digilib.unimus.ac.id/files/disk1/129/jtptunimus-gdl-agussalimc-6426-2-babii.pdf (diakses 1/8/20 pukul 22.40 WIB)

http://eprints.undip.ac.id/45587/3/BAB_II_Tinjauan_Pustaka.pdf (diakses pada 1/8/20 pukul 21.50 WIB)

http://indoprinter3d.com/printer-3d/material-printer-3d/petg-material-gabungan-keunggulan-pla-dan-abs/ (diakses pada 20/9/2020 pukul 10.30 WIB)

http://indoprinter3d.com/printer-3d/material-printer-3d/polylactic-acid-pla/ (diakses pada 5/9/2020 pukul 11.12 WIB)

http://repository.president.ac.id/xmlui/bitstream/handle/123456789/536/003201305022.pdf?sequence=1&isAllowed=y (diakses 5/7/20 pukul 15.50 WIB)

http://repository.unpas.ac.id/29790/1/BAB%20II.pdf (diakses pada 8/9/20 pukul 10.15 WIB)

https://digiwarestore.com/id/digiware-news/54_memilih-filament-untuk-3d-printer (diakses pada 5/9/20 pukul 07.50 WIB)

https://ee.unud.ac.id/file_pendukung_data_riwayat/1448410232.pdf (diakses pada 29/7/20 pukul 23.00 WIB)

https://id.wikipedia.org/wiki/Inkscape (diakses 4/8/20 pukul 08.33 WIB)

https://sujanayogi.wordpress.com/2010/03/05/gambar-teknik-mesin/ (diakses pada 01/10/20 pukul 20:00)

https://www.academia.edu/15342107/23_Tutorial_Inkscape (diakses 4/8/20 pukul 08.35 WIB)

https://www.depoinovasi.com/produk-1004-stepper-motor-driver-drv8825-komplit-heatsink.html (diakses pada 8/8/20 pukul 22.25 WIB)

https://www.depoinovasi.com/produk-971-motor-stepper-nema-17-extra-long-bipolar-4-wire-3d-printer-cnc.html (diakses pada 14/8/20 pukul 09.00 WIB)

https://www.makerspaces.com/arduino-uno-tutorial-beginners/ (diakses pada 03/10/20 pukul 18.04 WIB)

https://www.plukme.com/post/pengertian-autocad-pengenalan-dan-fungsi-dasar-autocad/ (diakses pada 28/09/20 pukul 19:30)

Irawan, Agustinus Purna. 2007. Diktat Kuliah Mekanika Teknik (Statika Struktur). Jakarta : Fakultas Teknik Universitas Tarumanagara

Munadi, Aulia Syukri, Joga D. Setiawan, Mochammad Ariyanto. Rancang Bangun Prototipe Mesin CNC Laser Engraving Dua Sumbu Menggunakan Diode Laser. Jurnal Teknik Mesin Indonesia, 2018. Vol. 13, No.1.

Sato G. Takeshi, H. N. Sugiarto. 1994. Menggambar Teknik Mesin menurut Standar ISO.Jakarta: PT. Pradnya Paramita

Unduhan

Diterbitkan

2020-02-02

Terbitan

Vol 4 No 1 (2020): Motor Bakar : Jurnal Teknik Mesin

Bagian

Articles

Lisensi

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms