Menurunkan Kerusakan yang Sering Terjadi pada Alat Berat Excavator Komatsu PC200-8 dengan Proses Perbaikan pada Sistem Bahan Bakar

Penulis

  • Vuko Arief Tua Manurung Politeknik Astra Jakarta Indonesia
  • Danang Sigit Pamungkas Politeknik Astra Jakarta Indonesia
  • Yohanes Trijoko Wibowo Politeknik Astra Jakarta Indonesia
  • Amir Amir Universitas Muhammadiyah Tangerang image/svg+xml

DOI:

https://doi.org/10.31000/mbjtm.v7i2.9732

Kata Kunci:

fuel system, breakdown unscheduled, physical availability..

Abstrak

Maintenance of heavy equipment units is required to maintain and ensure the performance of the unit in ready-to-use condition. Damage that occurs, especially in the fuel system line, often causes the excavator unit to become low power, even when the engine turns off. In PT XYZ, damage of the fuel system often occurs causing the unit to undergo unscheduled breakdown. By using the fishbone method to find the cause of the problem, it was found that the existing treatments were not optimal so that problems that started to appear were not immediately followed up. By monitoring the maintenance schedule and accelerating the replacement of fuel filters, unscheduled repairs can be overcome and the physical availability target is achieved..

Referensi

Technical Training Departement. (2012). Basic Maintenance, PT United Tractors Tbk, Jakarta.

Technical Training Department (2011). Basic Mechanic Course - Basic Maintenance. PT United Tractors Tbk. Jakarta.

Manurung, V. A. T., Illiyin, D. E. H., & Amir, A. (2023). Perancangan Recoil Spring Cover untuk Excavator pc1250-8 di PT XX. Motor Bakar: Jurnal Teknik Mesin, 7(1), 37-42.

Camila Balbontin, David A. Hensher, Loan Ho & Edward Wei (2023) Identifying the relationship between tyre performance, fuel consumption and maintenance costs in operating urban bus services: A case study in Sydney, Australia using telematics and fitted sensors, International Journal of Sustainable Transportation, 17:4, 348-368, DOI: 10.1080/15568318.2022.2039977

Manurung, Vuko AT, Yohanes Tri Joko, and Agus Santosa. "Reducing the High Temperature of Water Radiator Dump Truck (HD 785-7 Type) by Making Special Tool." IOP Conference Series: Materials Science and Engineering. Vol. 846. No. 1. IOP Publishing, 2020.

T Gilles (2012), Automotive Service Inspection, Meintenance, Repair, 4th Edition, Delmar.

Technical Training Department (2011), Basic Mechanic Course - Electrical System. PT United Tractors Tbk., Jakarta.

Manurung, Vuko A. T., Jumraha, M. J., & Wibowob, Y. T. (2022), Menurunkan Lead Time General Overhaul Unit Excavator pc1250sp-8r di pt ut site loa janan dengan metode goh smart solution.

T. Hantanto and J. Letjend Sudjono Humardani No, Periodical Maintenance Service Volvo Truck FMX 440 di PT. Madhani Talatah Nusantara, Indones. J. Mech. Eng., vol. 2, 2022, [Online]. Available: https://politap.ac.id/journal/index.php/injection, diakses pada tanggal 18 April 2023.

Manurung, Vuko. A. T, Trijoko, Y., & Afani, R. P. (2019). Menurunkan Kerusakan Yang Tidak Terjadwal (Unschedule Breakdown) Sistem Bahan Bakar Pada Unit Komatsu HD 1500-7 Dipt Ut Site Kalimantan Timur. Jurnal Teknik Mesin dan Mekatronika (Journal of Mechanical Engineering and Mechatronics), 4(1), 15-20.

John Dixon (2010), Modern Diesel Technology, Preventive Maintenance and Inspection, Delmar Cengage Learning, USAl.

Risitano, A (2011), Mechanical Design, Taylor & Francis Group, Bosa Roca, Available from: ProQuest Ebook Central, diakses 4 October 2022.

Ari Ismu Gunarsa, (2017) Program Reduce Fuel Consumption Pada Unit Komatsu HD 1500-7 Di PT United Tractors FMC PAMA Site Batukajang Kalimantan Timur, Jakarta

Manurung, Vuko A. T, Praja, A. K., & Sutama, Y. C. (2017). Meningkatkan Physical Availability (PA) Scania P380 dengan Program Customer Solution Management di PT TSP customer PT United Tractors Site Satui–Sungai Danau. Technologic, 7(2).

Olufemi B. Akinluli, Vincent A. Balogun, Temitayo M. Azeez (2015), Development of an expert system for the repair and maintenance of bulldozer’s work equipment failure, International 26.Asif Faiz, Walsh Michael P, Weaver Christopher S, (1996). Air Pollution From Motor Vehicles, Standards and Technologies for Controlling Emissions, The World Bank Washington, D.C, USA.

Avinash Kumar Agrawal, Shrawan Kumar Singh, Shailendra Sinha and Mritunjay Kumar Shukla (2003) “Effect of EGR on the Exhaust Gas Temperature and Exhaust Opacity in Compression Ignition Enginesâ€, Kanpur 208 016, India.

Cenk Sayin, Ahmet Necati, Mustafa Canakci (2009). The Influence of operating parameters on the performance and emissions of a DI diesel engine using metanol-blended-diesel fuel, International Journal of Fuel, Number 89, ScienceDirect.

Unduhan

Diterbitkan

2023-12-31

Terbitan

Vol 7 No 2 (2023): Motor Bakar: Jurnal Teknik Mesin

Bagian

Articles

Lisensi

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms