Perbaikan Rubber Skirt Mesin Belt Conveyor di PT. Cemindo Gemilang Tbk. Analisis Potensi Bahaya dan Pengendaliannya

Penulis

  • Jamilah Mardiah Universitas Sultan Ageng Tirtayasa image/svg+xml
  • Ikhsanudin Ikhsanudin

DOI:

https://doi.org/10.31000/mbjtm.v9i1.13198

Kata Kunci:

Mesin Belt Conveyor, Rubber Skirt, JSA

Abstrak

In a job there must be something called work accidents, these work accidents can be caused by humans and the environment, where this is due to unsafe behavior and unsafe conditions. Occupational Health and Safety (K3) is something that is very important and must be given great attention in companies/industry in the current era. From the research conducted, it aims to carry out an analysis of the potential hazards and how to control the Conveyor Belt Machine. This research was conducted using a descriptive method, which was to obtain data through literature studies and documentation. The data were combined from industry, journals and the internet. Belt Conveyor is one of the equipment in the cement company PT. Cemindo Gemilang Tbk. Belt Conveyor as a machine for moving and transferring material along a horizontal direction or with a continuous slope. In general, the potential for danger at PT. Cemindo Gemilang Tbk. has been identified and handled well. To improve health and safety at work, various identified potential hazards can become knowledge for implementing work more thoroughly and carefully.

Keywords: control, conveyor belt, K3, potential hazard.

Dalam sebuah pekerjaan pasti ada yang namanya kecelakaan kerja, dari kecelakaan kerja ini bisa disebabkan oleh manusia dan lingkungan, dimana hal ini karena perilaku tidak aman dan kondisi tidak aman. Keselamatan dan Kesehatan Kerja (K3) adalah sesuatu yang sangat penting dan harus sangat diperhatikan di dalam perusahaan/industri di era saat ini. Dari penelitian yang dilakukan bertujuan untuk melakukan analisis pada potensi bahaya dan cara pengendalian terhadap Mesin Belt Conveyor. Penelitian yang dilakukan ini adalah menggunakan metode deskriptif, yang mana untuk mendapatkan data melalui studi pustaka, studi literatur, informasi-informasi atau data dari industri, jurnal maupun internet. Belt Conveyor merupakan salah satu equipment yang berada di perusahaan semen PT. Cemindo Gemilang Tbk. Belt Conveyor sebagai mesin untuk memindahkan dan mentransfer material dengan sepanjang arah yang horizontal atau dengan kemiringan secara continue (terus menerus).

Kata kunci: potensi bahaya, pengendalian, k3, belt conveyor.

Referensi

Aprilla, B. F., & Yulhendra, D. (2023). Penerapan Metode HIRARC dalam Menganalisis Risiko Bahaya dan Upaya Pengendalian Kecelakaan Kerja di Area Crusher dan Belt Conveyor PT. Semen Padang. Bina Tambang, 8(1), 203–212.

Levi, A. (2017). Usulan Perbaikan Keselamatan Kerja Menggunakan Metode Job Safety Analysis (JSA) dan Failure Mode And Effect Analysis (FMEA). 15(2), 151–167.

Ningtias, I. D., Ihsan, T., & Lestari, R. A. (2020). Analisis Manajemen dan Iklim Keselamatan di Lingkungan Kerja pada Industri Semen Indonesia: Sebuah Review. Jurnal Dunia Kesmas, 9(2), 161–174. https://doi.org/10.33024/jdk.v9i2.2853

Nurrahmat, F. (2022). Analisa Kerusakan Belt Conveyor Dan Proses Penyambungan Belt Conveyor 23Bc-04 Limestone Raw Mill Di Pt. Semen Baturaja (Persero) Tbk. Jurnal Multidisipliner Bharasumba, 1(03 October), 498–511.

Putri, J. I., & Ulkhaq, M. M. (2017). Identifikasi Bahaya Dan Risiko Pada Area Produksi Cv Mebel Internasional, Semarang Dengan Metode Job Safety Analysis. Industrial Engineering Online Journal, 6(1), 343–354. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/15583

Qadafi, M. (2022). Analisa Penyebab Kerusakan dan Perbaikan pada Belt Conveyor di PT. MIFA Bersaudara. Jurnal Mahasiswa Mesin UTU (JMMUTU), 1(1), 19–26.

Rofifah. (2020). Job Safety Analysis (JSA). Paper Knowledge . Toward a Media History of Documents, 2006, 12–26.

Safaruddin, A. F. (2022). Perawatan dan perbaikan. Jurnal Ilmu Terapan, 3(3), 15.

Saputra, D. A. (2019). Analisis Sistem Pengendalian Bahaya Conveyor Belerang Di Pelabuhan Pt. Petrokimia Gresik. The Indonesian Journal of Occupational Safety and Health, 7(3), 368. https://doi.org/10.20473/ijosh.v7i3.2018.368-377

Syafrial, H., & Ardiansyah, A. (2020). Prosedur Keselamatan Dan Kesehatan Kerja (K3) Pada PT. Satunol Mikrosistem Jakarta. Abiwara : Jurnal Vokasi Administrasi Bisnis, 1(2), 60–70. https://doi.org/10.31334/abiwara.v1i2.794

Syarifuddin, M. A., & Suriyanto. (2019). Analisis Penyebab Utama Kerusakan Belt Conveyor Pada BC 6 System Menggunakan Metode Fishbone Diagram. Prosiding SEMNASTERA (Seminar Nasional Teknologi Dan Riset Terapan), 1(September), 0–5.

Unduhan

File Tambahan

Diterbitkan

2025-01-31

Terbitan

Vol 9 No 1 (2025): Motor Bakar: Jurnal Teknik Mesin

Bagian

Articles

Lisensi

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms