ANALISIS POTENSI HIDRO KINETIK DI SUNGAI CISADANE UNTUK PENGEMBANGAN TURBIN ULIR SCREW SKALA KECIL

Penulis

DOI:

https://doi.org/10.31000/mbjtm.v7i2.9797

Abstrak

Energy is currently decreasing due to excessive use of fossil energy in all fields. Issues about global warming, air pollution and the effects of greenhouse gases have also encouraged progress in research on more environmentally friendly sources of electrical energy (Revelation, 2018). Calculation of Measured Discharge To obtain discharge data, direct measurements were carried out at the Air Anak River PLTMH location. The method used to measure discharge is by making stakes on both sides of the river bank. Then tie a rope on both sides of the stake so that the rope stretches from one bank of the river to the other, so that the width of the river can be measured. After obtaining the width of the river, points were made every 25 cm and at each point the flow speed was found using a current meter and the depth was measured. Discussion of the results of the analysis of hydrokinetic energy potential in the Cisadane River can involve various aspects, including the data that has been collected, analysis methods, and the implications in the context of sustainable energy development. The following are the steps that may be involved in discussing the results of the hydrokinetic energy potential analysis in the Cisadane River to obtain a water discharge of around 0.14 liters/minute and obtain a hydropower potential of 2.5 m3/s.

Referensi

Ardi, H.M., Fahmi, M.M., Setiawan, D., & Efendi, M.Y (2023). Perencanaan Transmisi Mekanik Roda Gigi dan Generator Turbin Vorteks PLTMH. Jurnal Teknik Mesin.

Jamaluddin, J. (2023). Modifikasi Alat Pembangkit Listrik Mikrohidro Menggunakan Turbin Screw. ILTEK: Jurnal Teknologi, 18 (01). 46-50.

Saputra, M.A. T., Weking, A.I & Artawijaya, I. W. (2019). Eksperimental Pengaruh Variasi Sudut Ulir Pada Turbin Ulir (Archimedean Screw) Pusat Pembangkit Tenaga Mikro Hidro Dengan Head Rendah. Majalah Ilmiah Teknologi Elektro, 18 (1), 83.

Rahmawaty, R., Suherman, S., Dharma, S., & A. (2022). Kajian Eksperimental pada Turbin Screw Archimedes Skala Kecil. Jurnal Rekayasa Mesin. 17 (1), 95-102.

Ointu, S., Surusa, F. E.P., & Zainuddin, M. (2022) Studi Perencanaan Pembangkit Listrik Tenaga Mikrohidro (PLTMH) Berdasarkan Potensi Air yang Ada di Desa Pinogu. Jambura Journal of Electrical and Electronics Engineering, 2 (2), 30-38.

Putra, F., Effiandi, N., & Leni, D. (2019). Pengoperasian dan Perawaran PLTMH pada Pembangkit Listrik Mikro Hidro (PLTMH) di Sungai Batang Geringging Kota Padang. Jurnal Teknik Mesin, 10 (2), 25-30.

Hutabarat, S.A., Nufus, T. H., & Santoso, B. (2022). Rancang Bangun Pembangkit Listrik Tenaga Mikro Hidro Tipe Turbin Screw di Desa Ramba Goring-goring. In Prosiding Seminar Nasional Teknik Mesin (No. 1, pp. 848).

Romadhoni, W., Sulaiman, D., & Purnama, P, (2021). Analisis Potensi Pembangkit Listrik Tenaga Mikro Hydro pada Anak Sungai di Bulungan. Jurnal Kumparan Fisika, 4 (1), 61-66.

Baskoro, F., Kartim, M.W.N., Widyartono, M., & Haryudo, S.I (2021). Kajian Kemiringan Blade dan Head Turbib Archimedes Screw terhadap Daya Keluaran Generator AC 1 Phase 3 kW. Jurnal Teknik Elektro, 10 (1). 219-288.

Suwoto, G., Bono, B., & Mahfudz, Y. (2021). Karakteristik Turbin Ulir Pada Aliran Sungai yang Memiliki Head Rendah Sebagai Pembangkit Tenaga Listrik. Eksergi, 17 (3), 213-220.

Wiranto, W., Hiendro, A., & Wicaksono, R.A. Analisis Pengaruh Jumlah Blade Turbin Air Terhadap Kinerja PLTMH Dengan Menggunakan Turbin Terapung Archimedes Screw. JTRAIN: Jurnal Teknologi Rekayasa Teknik Mesin. 4 (1), 09-13.

Yandra, F.E., & Djufri, S.U. (2020) Studi Awal Pemanfaatan Turbin Screw pada Aliran Sungai Kecil di Kota Jambi. Journal of Electrical Power Control and Automation (JEPCA), 2 (2), 29-32.

Saroinsong, T., Slat, N. E., Mekel, A. N., & Noya, D. (2019). Pengembangan Turbin Ulir Archimedes untuk Pembangkit Listrik Tenaga Mikrohidro Head Rendah (Doctoral dissertation, Politeknik Negeri Manado).

Saroinsong, T., Slat, N.E., Mekel, A.N., & Noya, D. (2019). Pengembangan Turbin Ulir Archimedes untuk Pembangkit Listrik Tenaga Mikrohidro Head Rendah (Doctoral Disertation, Politeknik Negeri Manado).

Unduhan

Diterbitkan

2023-11-22

Terbitan

Vol 7 No 2 (2023): Motor Bakar: Jurnal Teknik Mesin

Bagian

Articles

Lisensi

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License

YOU ARE FREE TO:

  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms