ANALISIS AERODINAMIS SECARA TEORITIS DAN PENERAPAN APLIKASI INVENTOR DAN CFD PADA RANCANG BANGUN PROTOTYPE MOBIL LISTRIK “INKAS A6†BLDC 1000 WATT DENGAN KONSEP SHUTTLE GOLF
DOI:
https://doi.org/10.31000/mbjtm.v8i1.10121Keywords:
Shuttle golf, Autodesk Inventor, Autodesk CFD, Coefficient Drag.Abstract
The more rapid development of the times in the era of globalization and technology, the use of transportation is the best solution to support increased human mobility. It is noted that the use of land transportation has increased along with the increase in human mobility. This matter was also followed by the existence of global issues regarding the energy crisis that hit the world. The need for transportation is increasing, resulting in an increase in the energy required.This final project report entitled "Theoretical Aerodynamic Analysis and Application of Inventor and CFD Applications in the Design and Build of the Electric Car Prototype "Inkas A6" Bldc 1000 Watt With the Golf Shuttle Concept" initial design and knowing airflow in the Shuttle golf vehicle simulation process carried out on the Autodesk CFD 2019 application The results of the simulations carried out with the Autodesk CFD 2019 software and the Cd (Coefficient Drag) calculations carried out by researchers on the body of this golf shuttle vehicle obtained a value of 34.3 and the maximum and minimum pressures obtained were 102683 Pa and 1013160 Pa. And for the value of the Drag Force calculation is 2367 Pa then the maximum and minimum relative airspeed obtained is 3.52 m/s and -1.06 m/s.References
Bagus Wahyu Prastyo, d. (2020). ANALISIS AERODINAMIKA PADA BODI MOBIL HEMAT ENERGI LINTANG SAMUDRA MENGGUNAKAN METODE COMPUTATIONAL FLUID DYNAMICS . Semarang: Universitas Wahid Hasyim .
Batara, d. (2022). ANALISA KEBUTUHAN TENAGA PENGGERAK PADA TRANSPORTER KAPASITAS 750 Kg. Jambi: Universitas Jambi.
DEEPAK MOHANRAJ, d. (2022). A Review of BLDC Motor: State of Art, Advanced Control Techniques, and Applications. Chennai: Department of Electrical and Electronics Engineering, SRM Institute of Science and Technology.
Dr. Ir. Agus Wibowo, M. M. (2021). MOBIL ISTRIK DENGAN BATERAI LITHIUM-ION. Semarang: Yayasan Prima Agus Teknik.
Drastiawati, N. S. (2019). Analisis Kekuatan Material Fiber Carbon dengan Variasi Core terhadap Kekuatan Impak pada Tulangan Bodi Mobil Garnesa Racing Team. Surabaya: Universita Surabaya.
Ida Kaniawati, d. (2023). Mekanika Newtonian dan Signifikansi Filosofisnya. Bandung: Universitas Pendidikan Indonesia.
Indra Diantoro, d. (2022). PENGARUH LOKASI KETEBALAN MAKSIMUM AIRFOIL SIMETRIKAL TERHADAP COEFFICIENT DRAG DAN COEFFICIENT LIFT PADA MAIN ROTOR HELIKOPTER BELL 412 . Magelang: Pertahanan Akademi Militer Magelang.
Isworo, H. (2019). ANALISIS NILAI KOEFISIEN DRAG PADA MODEL MOBIL LISTRIK WASAKA . Banjarmasin: Politeknik Negeri Banjarmasin .
Matius Umbu Laga, d. (2019). Desain Modul Pembelajaran Mandiri Tentang Gerak Parabola Pada Bidang Datar Dengan Memperhitungkan Gesekan Udara . Salatiga: Universitas Kristen Satya Wacana .
Muchammad. (2019). ANALISIS MOMEN POROS DAN GAYA SAMPING HORN RUDDER BIDANG KENDALI PESAWAT N-XXX MENGGUNAKAN COMPUTATIONAL FLUID DYNAMIC . Semarang: Universitas Diponegoro .
Muhammad Ruswandi Djalal, d. (2019). SPEED CONTROL SERIES DC MOTOR USING ANT COLONY OPTIMIZATION . Makassar: Politeknik Negeri Ujung Pandang .
Munadi, d. (2021). Pengujian Efisiensi Energi Motor BLDC 72 Volt – 7kW untuk Aplikasi Model Electric Urban Car . Semarang: Universitas Diponogoro .
Mustopa. (2022). Perancangan Bodi Mobil . Malang: Universitas Muhammadiyah Malang.
Downloads
Additional Files
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Motor Bakar : Jurnal Teknik Mesin have CC BY-NC or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.
In developing strategy and setting priorities, Motor Bakar : Jurnal Teknik Mesin recognize that free access is better than priced access, libre access is better than free access, and libre under CC BY-NC or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License
YOU ARE FREE TO:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms
