SISTEM KENDALI CERDAS PEMBERIAN PAKAN DENGAN PENERAPAN INTERNET OF THINGS
Abstract
Kucing merupakan hewan yang banyak dipelihara orang karena menggemaskan, cantik warna bulunya, memiliki tingkah laku yang lucu, dan bersahabat. Kucing juga dianggap bisa menghilangkan ataupun mengurangi stress setelah melakukan rutinitas pekerjaan di kantor. Permasalahan yang sering terjadi pada pemeliharaan kucing adalah proses pemberian makan minum, faktor inilah yang menjadi alasan penulis untuk membuat Kendali Cerdas sistem pemberian makan dan minum (Pakan) kucing dengan penerapan internet of Things. Tujuan pembuatan Kendali Cerdas ini adalah untuk menggantikan tugas pemilik kucing untuk memberikan pakan setiap harinya. Adapun metode yang digunakan yaitu menggunakan NodeMcu ESP8266 sebagai modul pengendali, Sensor Ultrasonic, Sensor LoadCell, dan aplikasi android sebagai media penerima informasi dan mengontrolan manual sistem. Sistem ini akan mengendalikan pemberian pakan kucing dengan mengontrol stok pakan pada dispenser dan jumlah pakan pada wadah. Hasil pengujian yang telah dilakukan menunjukan nilai akurasi Sensor Ultrasonic 99,8% dan akurasi sensor LoadCell 95,2% dalam melakukan pemantauan pada dispenser dan wadah pakan kucing.
References
Bisri, W. T. A. (2019). Rancang Bangun Alat Pemberi Pakan Otomatis Terhadap Kucing Peliharaan Menggunakan Arduino uno. Tesla : Jurnal Teknik Elektro, 23 no. 1.
Devitasari, K. P. K. R. (2020). Rancang Bangun Alat Pemberi Pakan Kucing Otomatis Menggunakan Mikrokontroler Nodemcu berbasis Internet Of thing. Jurnal Sains Komputer & Informatika (J-SAKTI).
Edilla, Muhammad Anwardi Pulungan, A. A. (n.d.). Rancang Bangun Robot Penyaji Minuman Menggunakan ATMega 8535 dan Mini water pump. Ecotipe, 2021.
Furqon, A., Prasetijo, A. B., & Widianto, E. D. (2019). Rancang Bangun Sistem Monitoring dan Kendali Daya Listrik pada Rumah Kos Menggunakan Nodemcu dan Firebase Berbasis Android. Techné : Jurnal Ilmiah Elektroteknika, 18 no.2.
Guna, P. I. A., Suyadnya, I. M. A., & Agung, I. G. A. P. R. (2018). Sistem Monitoring Penetasan Telur Penyu Menggunakan Mikrokontroler Nodemcu ESP8266 dan Protokol MQTT dengan Notifikasi Berbasis Telegram Messenger. Journal of Computer Science and Informatics Engineering (J-Cosine), 2 no. 2.
Habillah Abbas, Kusnadi Kusnadi, Wanda Ilham, S. P. (2021). Sistem Kendali Alat Pemberi Pakan Kucing Otomatis Menggunakan Modul Nodemcu. Jurnal Digital Of Information Technology, 11 NO. 2.
Haris, A., Kusuma, D. T., & Pratama, R. N. (2018). Sistem Penyortiran Buah Apel Manalagi Menggunakan Sensor LoadCell dan TCS3200 Berdasarkan Berat dan Warna Berbasis Arduino uno. Jurnal PETIR, 11 no 1.
Husain, Asmah Akhriana, Herlinda, Ahmad , Nurdiansah, R. P. W. T. (2022). Rekayasa tempat parkir kendaraan mobil berbasis teknologi informasi. PROtek : Jurnal Ilmiah Teknik Elektro, 9 no. 2.
Husain, herlinda, kasmawaru , nurdiansah nurdiansah, erna, andi hasriadi putra. (2023). Implementasi Forward Chaining untuk Mendiagnosis Kerusakan Motor Vespa Klasik pada Bengkel Skuter Ombur. Jambura Journal of Electrical and Electronics Engineering, 5 no. 2.
Husain, E. al. (2023). Pemanfaatan dan Penerapan Internet of Things Di berbagai bidang. Sonpedia publishing indonesia.
II. L. C. Adiputri, N. M. F. and N. R. (2020). Tutorial Pembuatan Protipe Prediksi Ketinggian Air (PKA) dan Aigmented Rwality Berbasis IoT versi 2. Kreatif Industri Nusantara.
Ikhsan, M. (2019). Rancang bangun alat pengering gabah otomatis menggunakan sensor berat berbasis arduino uno. Repository Universitas Jember.
Maulana, I. F. (2020). Penerapan Firebase Realtime Database pada Aplikasi E-Tilang Smartphone berbasis Mobile Android. Jurnal Resti – Rekayasa Sistem Dan Teknologi Informasi.
Nur Fitriana Putri, Rahmi Hidayati*, I. N. (2023). Rancang Bangun Sistem Pemantauan dan Kendali Budidaya Anggur Dengan Penerapan Internet of Things (IoT) Berbasis Android. Jurikum, Jurnal Riset Komputer, 10 no.3.
Puspasari, F.-, Fahrurrozi, I.-, Satya, T. P., Setyawan, G.-, Fauzan, M. R. A., & Admoko, E. M. D. (2019). Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian. Jurnal Fisika Dan Aplikasinya, 15 no.2.
Putri, I. A., Fauziah, N., & Atifah, Y. (2022). Analisis Perubahan Tingkah Laku Kucing Anggora (Felis catus) Betina Selama Masa Kebuntingan. Prosiding Seminar Nasional Biologi.
Samsugi, S., Neneng, & Suprapto, G. N. F. (2021). Otomatisasi Pakan Kucing Berbasis Mikrokontroller Intel Galileo Dengan Interface Android. Jurnal Sains Komputer & Informatika, 5 no. 1.
Setiawan, A. (2019). Pengembangan Smart Home Dengan Microcontrollers ESP32 Dan MC-38 Door Magnetic Switch Sensor Berbasis Internet of Things (IoT) Untuk Meningkatkan Deteksi Dini Keamanan Perumahan. Jurnal Resti – Rekayasa Sistem Dan Teknologi Informasi.
Suwed, R. M. N. M. A. (2021). Panduan Lengkap Kucing. Penebar Swadaya , anggota IKAPI.
Wijayanto, Y. Y. & A. (2018). Mudah Membuat dan Berbisnis Aplikasi Android dengan Android Studio. Elex Media Komputindo.
Yanuar Mukhammad, A. Santika, S. H. (2022). Analisis Akurasi Modul Amplifier HX711 untuk Timbangan Bayi. Medika Teknika, 4 no.1
Copyright (c) 2024 JIKA (Jurnal Informatika)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
License and Copyright Agreement
In submitting the manuscript to the journal, the authors certify that:
- They are authorized by their co-authors to enter into these arrangements.
- That it is not under consideration for publication elsewhere,
- That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
- They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
- They agree to the following license and copyright agreement.
Copyright
Authors who publish with International Journal of Advances in Intelligent Informatics agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.Â
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Licensing for Data Publication
International Journal of Advances in Intelligent Informatics use a variety of waivers and licenses, that are specifically designed for and appropriate for the treatment of data:
Open Data Commons Attribution License, http://www.opendatacommons.org/licenses/by/1.0/ (default)
Creative Commons CC-Zero Waiver, http://creativecommons.org/publicdomain/zero/1.0/
Open Data Commons Public Domain Dedication and Licence, http://www.opendatacommons.org/licenses/pddl/1-0/
Other data publishing licenses may be allowed as exceptions (subject to approval by the editor on a case-by-case basis) and should be justified with a written statement from the author, which will be published with the article.
Open Data and Software Publishing and Sharing
The journal strives to maximize the replicability of the research published in it. Authors are thus required to share all data, code or protocols underlying the research reported in their articles. Exceptions are permitted but have to be justified in a written public statement accompanying the article.
Datasets and software should be deposited and permanently archived inappropriate, trusted, general, or domain-specific repositories (please consult http://service.re3data.org and/or software repositories such as GitHub, GitLab, Bioinformatics.org, or equivalent). The associated persistent identifiers (e.g. DOI, or others) of the dataset(s) must be included in the data or software resources section of the article. Reference(s) to datasets and software should also be included in the reference list of the article with DOIs (where available). Where no domain-specific data repository exists, authors should deposit their datasets in a general repository such as ZENODO, Dryad, Dataverse, or others.
Small data may also be published as data files or packages supplementary to a research article, however, the authors should prefer in all cases a deposition in data repositories.
