PERANCANGAN ALAT PENGERING OTOMATIS GUNA OPTIMASI PRODUKSI BATIK MADURA PATENG-TENG MENGGUNAKAN METODE QUALITY FUNCTION DEPLOYMENT (QFD) PADA BATIK PATENG-TENG MADURA

Andhika Cahyono Putra, Andre Ridho Saputro, Hadi Kusnanto

Abstract


Batik is an Indonesian cultural heritage that has been recognized by UNESCO as a humanitarian heritage for oral and intangible culture since October 2009. One type of batik that has uniqueness and high aesthetic value is the Madura Pateng-Teng Batik from Bangkalan, Madura. However, the sustainability of batik production faces big challenges due to the long production process, especially during the drying stage which still depends on weather conditions. Uneven drying can affect batik quality and extend production time, thereby reducing the efficiency and competitiveness of the batik industry. This research aims to design an automatic drying tool to optimize the production of Madura Pateng-Teng Batik by applying the Quality Function Deployment (QFD) method. This method is used to identify the needs and desires of batik craftsmen and transform these needs into appropriate technical specifications for tools. This research uses a quantitative approach by collecting data through questionnaires distributed to batik business owners in Bangkalan. The data obtained was analyzed using the House of Quality (HoQ) to determine optimal dryer specifications. The research results show that the designed automatic dryer is able to speed up the drying process, improve the quality of the final batik result, and reduce dependence on weather conditions. This tool is equipped with a temperature and time control system that can be adjusted to the type of batik cloth, and is designed with energy-saving technology to increase production efficiency. Thus, it is hoped that the application of this automatic drying tool can provide an innovative solution for Madurese Pateng-Teng Batik craftsmen, so that they can maintain production continuity and preserve the cultural heritage of typical Madurese batik.


Keywords


Madura Pateng-Teng Batik, automatic dryer, Quality Function Deployment (QFD), production efficiency, technological innovation.

Full Text:

PDF

References


Anam, C., Muslimin, M., & Putra, A. C. (2023). Strategi Peningkatan Kualitas Produk Lokal Dengan Menggunakan Metode Quality Function Deployment (QFD) di UKM Mojokerto. Jurnal Produktiva, 3(1).

Asari, A., Widiana, I. N. W., Nur, S., Muniarty, P., Lotaningrat, D., Rijal, S., … Muslimin, M. (2023). Manajemen Inovasi. (M. A. Yaqin, Ed.) (Pertama). Yogyakarta: CV. Istana Agency.

Harsokoesoemo, H. D. (2004). Pengantar Perancangan Teknik(Perancangan Produk). BAndung: Institut Teknologi Bandung.

Kostidi, E., Cui, X., & Lyridis, D. (2024). Assessing the On-Board Storage and Use of Ammonia as a Fuel Applying the House of Quality. Journal of Marine Science and Engineering, 12(7). https://doi.org/https://doi.org/10.3390/jmse12071097

Putra, A. C., Prastiyo, D. A., & Septyawan, R. D. (2019). PENGEMBANGAN PRODUK SEPEDA UNIVERSITAS MENGGUNAKAN METODE QFD ( QUALITY FUNCTION DEPLOYMENT ). In Seminar Nasional Penelitian dan Pengabdian Masyarakat (Vol. 2).

Putra, A. C., & Puspitorini, P. S. (2017). PEMODELAN BUSINESS PROCESS REENGINEERING IKM BATIK MENGGUNAKAN VALUE CHAIN UNTUK MENINGKATKAN LOCATIONAL ADVANTAGE. Majapahit Techno, 6(2), 1–8.

Putra, A. C., Rudiyanto, M. A., & Estiasih, S. P. (2021). PENINGKATAN EFISIENSI PRODUKSI PRODUK X PADA CV AU DENGAN RELAYOUT MENGUNAKAN METODE ARC ( ACTIVITY RELATIONSHIP CHART ) DAN PENDEKATAN BPR ( BUSINESS PROCESS REENGINERING ). In Seminar NAsional Waluyo Jatmiko 2021 (pp. 159–166).

Putra, A. C., Saputro, A. R., Ramadani, N. R., & Zaidah, N. (2023). Perancangan Mesin Oven Pengering Berbasis Energi Terbarukan Menggunakan Quality Function Deployment ( QFD ). Jurnal Produktiva, 033(2), 24–28.

Santoso, R., Erstiawan, M. S., & Kisworo, A. Y. (2020). Jurnal Nusantara Aplikasi Manajemen Bisnis Inovasi Produk , Kreatifitas Iklan , Efekvifitas Iklan , dan Brand Trust Mendorong Keputusan Pembelian. Jurnal Nusantara Aplikasi MManajemen Bisnis, 5(2), 133–145.

Saputro, A. R., & Maftuh, M. F. Z. (2022). Rancang Bangun Alat Penyimpanan Tempe ( Boksterra ) Dengan Metode QFD Studi Kasus UMKM Pembuat Tempe di Kota Surabaya. Journal of Manufacturing in Industrial Engineering and Technology, 1(1), 1–13.

Soraya, A. A., Malik, R., & Saputra, N. I. (2024). Analisis Kepuasan Pelanggan Terhadap PDAM Wilayah Pelayanan II Makassar Dengan Menggunakan Metode Customer Satisfaction Index ( CSI ) Dan Importance Performance Analysis ( IPA ). Jurnal Rekayasa Sistem Industri & Manajemen, 2(1), 19–26.

Wahyudiono, Hermanto, Y. B., Estiasih, S. P., & Aminatuzzuhro. (2024). Performance recovery of creative sector industries: strengthening management literacy and digital business innovation. Journal of Innovation and Entrepreneurship, 13(1), 21. https://doi.org/10.1186/s13731-024-00376-6




DOI: http://dx.doi.org/10.31000/mbjtm.v9i2.13666

Article Metrics

Abstract - 34 PDF - 0

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Andhika Cahyono Putra

Motor Bakar : Jurnal Teknik Mesin (ISSN: 2549-5038 e-ISSN: 2580-4979)

Copyright © 2017-2020 Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Tangerang. All rights reserved.


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License