Penerapan Metode HIRADC pada Bagian Proses Penerimaan di PT. CA

Dian Friana Hidayat, Joko Hardono

Abstract


Every job has the opportunity of the risk because occurrence of work accidents can be caused by various factors. PT. CA is a large distributor of motorcycle spare parts which has activities including receiving goods from fabrication and then storing them in temporary warehouses before being distributed to dealers in various regions. The company's activities have a large potential for accidents due to several operations. To hazard identification, risk assessment, and determining control in any work that occurs or has the potential to occur, it is necessary to analyze using HIRADC. The method used is a descriptive method described in the flow process and then identified possible hazards that occur in each activity step. After the identification process is complete, a risk assessment is carried out to determine the form of control. The object of research is the receiving section of the work area. The results of this study are that the receiving section has 7 existing activities and there are 20 potential hazards that are possible, from these potentials the current control is to maximize APD to minimize danger. The highest level of risk is substantial in the activity of moving cargo to temporary storage or inspection areas with a potential danger of crashing into workers which has an impact on limb injuries, fractures, and even death, so this activity is a concern to avoid work accidents. In addition, it is determined that hazard control is carried out by means of forklift lanes that are not allowed to be passed by workers and control recommendations are in the form of setting SOPs, ensuring that forklifts complete their activities to carry out inspections.

Keywords: Occupational safety, potential hazard, identification, risk, control, HIRADC

Full Text:

PDF

References


International Labour Organization. 2013. Keselamatan dan Kesehatan Kerja di Tempat Kerja (Sarana untuk Produktivitas). Modul 5. Edisi Bahasa Indonesia. Jakarta: ILO

Prihatiningsih, S. dan Suwandi, T. 2014. Penerapan Metode HIRADC Sebagai Upaya Pencegahan Kecelakaan Kerja Pada Pekerja Mesin Rewinder. The Indonesian Journal of Occupational Safety, Health, and Environment. 1 (1) p. 73 – 84.

Ramli, S. 2010. Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management. Dian Rakyat. Jakarta

Supriyadi, Nalhadi A. dan Rizaal A. 2015. Identifikasi Bahaya dan Penilaian Resiko K3 pada Tindakan Perawatan & Perbaikan Menggunakan Metode HIRARC (Hazard Identification Risk Assessment Risk Control) pada PT. X. Seminar Nasional Riset Terapan 2015. p. 281 – 286

Swaputri, Eka. 2010. Analisis Penyebab Kecelakaan Kerja. Jurnal Kesehatan Masyarakat. 5 (2) p. 95 – 105.




DOI: http://dx.doi.org/10.31000/jim.v6i2.4992

Article Metrics

Abstract - 292 PDF - 218

DOI (PDF): http://dx.doi.org/10.31000/jim.v6i2.4992.g2673

Refbacks

  • There are currently no refbacks.