Mendesain Meja Dan Kursi Ergonomi Dengan Mengacu Pada Nilai Antropometri Untuk Bagian Checking Rubber (Outsole) Di PT. Victory Chingluh Indonesia

Tri Widodo, Ismail Fardiansyah, Ali Gufron

Abstract


PT. Victory Chingluh Indonesia is a company engaged in the manufacture of sports shoes in collaboration with an American brand, namely Nike. From the results of the Nordic Body Map Questionnaire at the PPIC RH department of the checking ruber section, many workers have complaints in the muscles (musculoskeletal disorders) due to non-ergonomic workplaces as many as 20 workers or 64.5% feel pain in the high category, as many as 8 workers or 25, 8% felt pain in the moderate category, for the category of pain with very high intensity as many as 2 workers or 6.4% and 1 worker or 3.2% felt pain in the low category. From these results, it is necessary to take further action by making ergonomic designs of Working Furnitures (tables and chairs) with reference to anthropometric values. With this reference, we get a table design with a length of 133.6 cm using the 5th percentile, a table width of 66.8 cm with a 5th percentile and a table height of 63.2 and a chair design with a chair height of 41.2 cm with a 50th percentile. -, the width of the seat base is 40.5 cm with the 95th percentile, it is expected that workers who have a maximum hip width can use the chair, the length of the seat base is 37.8 cm with the 5th percentile, the height of the seat back is 54.5 cm with the 50th percentile th and the width of the seat backrest is 48.9 cm with the 95th percentile.

 

Keywords: Ergonomics, Anthropometry, musculoskeletal disorders. Nordic body map, design


Full Text:

PDF

References


Abdul Rahman, S. (2017). Rancang Bangun Mesin Pengiris Ubi Kayu Menggunakan Pendekatan Nordic Body Map (Nbm) Dan Pendekatan Antropometri. Jurnal Industri .

Djamal, H., & Kurniawan, M. F. (2019). Desain Alat Bantu Pengambilan Part Di Warehouse Pt . Xyz Dengan Aspek Ergonomi. Jisi: Jurnal Integrasi Sistem Industri, 6(2), 81–91.

Harahap, P., Huda, L., & Pujangkoro, S. (2013). Analisis Ergonomi Redesain Meja Dan Kursi Siswa Sekolah Dasar. Jurnal Teknik Industri USU, 3(2), 38–44.

Hardinto, I dan Yassierli. (2017). Ergonomi Suatu Pengantar. Bandung : Pt. Remaja Rosdakarya Offset

Hari Purnomo. (2013). Antropometri Dan Aplikasinya. Yogyakarta : Graha Ilmu

Hasimjaya, J., Wibowo, M., & Dodi Wondo. (2017). Kajian Antropometri & Ergonomi Desain Mebel Pendidikan Anak Usia Dini 3-4 Tahun di Siwalankerto. Jurnal Intra, 5(2), 449–459.

Kurnia Wijaya. (2019). Identifikasi Risiko Ergonomi Dengan Metode Nordic Body Map Terhadap Pekerja Konveksi Sablon Baju. Seminar dan Konferensi Nasional IDEC ISSN: 2579-6429

Kristanto, A., & Manopo, R. (2010). Perancangan Ulang Fasilitas Kerja Pada Stasiun Cutting Yang Ergonomis Guna Memperbaiki Posisi Kerja Operator Sebagai Upaya Peningkatan Produktivitas Kerja Studi kasus di Perusahaan Anode Crome Yogyakarta. Jurnal Informatika,4(2),467–479.

Nana Rahdiana. (2017). Identifikasi Risiko Ergonomi Operator Mesin Potong Guillotine Dengan Metode Nordic Body Map (Studi Kasus Di Pt. Xzy). Journal Industry Xplore – Vol. 02 No. 01,

Nurdian,E. & Endang,D. (2017). Postur Kerja Dengan Keluhan Musculoskeletal Disorders Pada Pekerja Manual Handling Bagian Rolling Mill. The Indonesian Journal of Occupational Safety and Health, Vol. 6, No. 1 Jan-April 2017: 97–106

Prasetyo, E., & Agri Suwandi. (2011). Rancangan Kursi Operator SPBU Yang Ergonomis Dengan Menggunakan Pendekatan Antropometri. Prosiding Seminar Nasional Dan Workshop Pemodelan Dan Perancangan Sistem 2011 ISBN 978- 602-19492-0-7, 169–177.

Putri, T. A., Ramadhan, M. N., & Ma, M. (2018). Perancangan Kursi Kerja Menggunakan Pendekatan Antropometri sebagai Solusi Keterbatasan Ibu Hamil dalam Bekerja. Seminar Dan Konferensi Nasional IDEC, 7–8.

Ramdhani, D. (2018). Analisis Postur Kerja Pengrajin Handycraft Menggunakan Nordic Body Map Dan Metode Rapid Upper Limb Assessment (RULA) (Doctoral dissertation, Fakultas Teknik).

Sokhibi, A. (2017). Perancangan Kursi Ergonomis untuk Memperbaiki Posisi Kerja Pada Proses Packaging Jenang Kudus. Jurnal Rekayasa Sistem Industri, 3(1), 61–72.

Setyaningsih, L., Anna, B., & Purbasari, A. (2016). Perancangan Footrest Untuk Mengurangi Kelelahan Operator pada Bagian Kaki di Cell S/A Coil XS156 di PT. ABC. Penelitian dan Aplikasi Sistem dan Teknik Industri, 10(2), 182900.

Setiawan, M. S., Hadyanawati, A. A., & Suryoputro, M. R. (2019). Desain Meja, Kursi, dan Lampu yang Terintegrasi guna Menunjang Aktifitas Belajar. IENACO (Industrial Engineering National Conference).

Teguh, A. (2019). Desain Meja Dan Kursi Kerja Pengeleman Wallpaper Untuk Mengurangi Keluhan Kelelahan Muskuluskeletal.

Yanto & Ngaliman. (2017). Ergonomi. Yogyakarta :C.V Andi Offset.




DOI: http://dx.doi.org/10.31000/jim.v6i2.5007

Article Metrics

Abstract - 337 PDF - 212

DOI (PDF): http://dx.doi.org/10.31000/jim.v6i2.5007.g2676

Refbacks

  • There are currently no refbacks.