Usulan Perbaikan Untuk Meningkatkan Produktivitas Proses Produksi Timbangan Weight Scale Dengan Metode Objective Matrix (Omax) Di PT. XYZ
Abstract
This study aims to improve the productivity of the weight scale production process by using the Objective Matrix (OMAX) Method supported by Fishbone Diagram analysis and the 5W+1H approach. The weight scale is an important tool in various industries, so effectiveness and efficiency in the production process are very important. In this study, Fishbone Diagram is used to identify and analyze the main causal factors that affect productivity, such as people, machines, materials, methods, environment, and measurement. After observation, there are four factors that cause a decrease in productivity of weight scale products, namely human factors, materials, methods and machines. The 5W+1H approach was then applied to formulate appropriate improvement solutions based on the identified causes. The OMAX method was used to measure and monitor the effectiveness of the proposed improvements. The results show that the integrated application of these methods can reduce production cycle time, improve product quality, and increase overall productivity. This research makes an important contribution to the development of productivity improvement strategies that can be applied in various manufacturing sectors.
Keywords: Productivity, Objective Matrix (OMAX) Method, Fishbone Diagram, 5W+1H, Process improvement
Full Text:
PDFReferences
Andriyany, D. P. (2021). Analisis Konsep Produktivitas Dan Faktor-Faktor Yang Mempengaruhi Produktivitas Kerja Karyawan (Studi Literatur) (Doctoral dissertation, STIE PGRI Dewantara Jombang).
Asti Musman (2019). Kaizen For Life. Jakarta : Penerbit Anak Hebat Indonesia.
Avianda, D., Yuniati, Y., & Yuniar, Y. (2013). Strategi Peningkatan Produktivitas di Lantai Produksi Menggunakan Metode Objective Matrix. Reka Integra, 1(4).
Budhiawan, J., Rimawan, E., Ganap, J. G., & Mayasari, E. (2021). Productivity Analysis Using Objective Matrix (OMAX) and Five Whys Analysis Methods on Rubber Powder Production Line at Pt Tiga Bintang Gautama.International Journal of Innovative Science and Research Technology, 6(8), 1216-1223.
Effendy, H., Machmoed, B. R., & Rasyid, A. (2021).
Pengukuran dan Analisis Produktivitas Menggunakan Metode Objective Matrix (OMAX)(Studi Kasus: di PDAM Kabupaten Gorontalo). Jambura Industrial Review(JIREV), 1(1), 40-47.
Fani, W. (2023). Pengembangan Sistem Informasi Perpustakaan Berbasis DekstopDi MTS Swasta Islamiyah (YPI) Pontianak (Doctoral dissertation, IKIP PGRI Pontianak). 16-20
Febriyanti, Mojang Ayu. Fenomena Shadow Waste Pickers Sebagai Jaringan Pengumpul Sampah Di Kawasan Sekitar Pasar Ciputat Tangerang Selatan.2023. PhD Thesis.
Universitas Nasional.
Fitri, A., & Helianty, Y. (2022). Usulan Peningkatan Produktivitas Di Direktorat Produksi PT Dirgantara Indonesia (PERSERO) Menggunakan Metode Objective Matrix (OMAX). e-Proceeding FTI.
Fradinata, E., Marsella, B., & Izzaty, N. (2022).
Pengukuran Produktivitas dengan Menggunakan Metode Objective Matrix pada Proses Produksi UD. KopiTeungku Aceh. Jurnal Serambi Engineering, 7(3).
Gultom, E. R. P., Hasibuan, Y. M., & Daulay, F. A. (2023). Peningkatan produktivitas pada lantai produksi dengan metode OMAX dan FTA di PT.Berlian Eka Sakti Tangguh.
Jurnal VORTEKS, 4(1), 273-281.
Gaapersz, V. 2001. Manajemen Produktifitas Total, Jakarta: PT.Gramedia PustakaUtama.
Hidayatullah, Muhammad Rizqi. Sistem Informasi Manajemen Produksi Seragam Olahraga Sekolah Di Cv. Edison Prima. 2023.
Irwansyah, D., Erliana, C. I., Fadlisyah, F., Ula, M., Fahrozi, M., & Harun, R. (2022).
Increasing Productivity in CPO Production Using The Objective Matrix Method.
International Journal of Engineering, Science and Information Technology, 2(2), 14-20.
Ma'rifah, J. D., & Amarta, X. (2023). Evaluasi Produktivitas Pengolahan Bahan Baku Furnitur Dengan Metode Objective Matrix. JIE Scientific Journal onResearch and
Application of Industrial System, 8(2). 139– 147
Moses Laksono Singgih & I Ketut Gunarta (2021). Manajemen Produktivitas Perusahaan, Jakarta : Penerbit ITS Tekno Sains
Mundari, S., & Herlina, R. F. (2023). Productivity Measurement to Monitor the Performance of Shrimp Cracker Companies.
International Journal, 11(12).
Prakoso, I. (2022). Productivity Analysis Of Split Stone Production Using Objective Matrix (Omax) Method (A Case Study). Journal of Industrial Engineering and Halal Industries, 3(1), 41-48.
Pratama, F. A., & Henny, H. (2018). Analisis Produktivitas Objective Matrix (Omax) Ditinjau Dari Keselamatan Dan Kesehatan Kerja Dilantai Produksi Di Cv. Grand Manufacturing Indonesia. Ina. J. Ind. Qual. Eng, 6(2), 1-8.
Ramadhan, F. F., & Nugroho, A. J. (2023).
Penugkuran Produktivitas Beton Ready Mix Dengan Metode OMAX ( Objective Matrix). Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, 3(2), 245-257
Sappa, F. R., & Al Faritsy, A. Z. (2021). Usulan Peningkatan Produktivitas ProduksiKain Batik Di Batik Berkah Lestari. Jurnal DISPROTEK Vol, 12(2).
Saputra, E. Y., Mulyati, D., & Maulinda, M. (2021). Analisa Produktivitas Proses Produktivitas Menggunakan Metode Objective Matrix (OMAX) Pada Perusahaan Air Minum Daerah Tirta. Karya Ilmiah Fakultas Teknik (KIFT), 1(2), 46-51.
Silaban, R. C. (2021). Upaya Peningkatan Produktivitas Dengan Metode Objective Matrix (OMAX). Jurnal Simetri Rekayasa, 3(1). 139 - 143.
Silitonga, D.J.A.F (2023) Pengaruh Penyambung Kompon Rubber End Terhadap Karakteristik Mekanik Produk Rubber End Di PT. Agronesia Inkaba. Politeknik ATK Yogyakarta, 16-17
SS, A. F., & Muhammad, I. R. (2021). Pengukuran Produktivitas Pada DepartemenProduksi dengan Menggunakan Metode Objective
Matrix (Omax) di PT. Papertech Indonesia Unit II Magelang. Borobudur Engineering Review, 1(2), 65-74.
Sumanth, D.J. 1984. Productivity Engineering and Management, New Delhi: TataMc Graw Hill Publishing Company Limited
Sumanth, D.J. 2004. Productivity Engineering and Management, New Delhi: TataMc Graw Hill Publishing Company Limited
Sungkawa, R. S. (2023). Analisis Produktivitas Produksi Menggunakan Metode Objective Matrix (OMAX) Di Usaha Konveksi Inez Sport (Doctoral dissertation, Universitas Islam Sultan Agung Semarang), 1(1), 19-25
Wahyuni, H. C., & Setiawan, S. (2017).
Implementasi Metode Objective Matrix (OMAX) Untuk Pengukuran Produktivitas Pada PT. ABC. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 1(1), 17-21
DOI: http://dx.doi.org/10.31000/jim.v9i2.12448
Article Metrics
Abstract - 127 PDF - 331DOI (PDF): http://dx.doi.org/10.31000/jim.v9i2.12448.g5541
Refbacks
- There are currently no refbacks.
Abstracted/Indexed On :
Counter Stat:
