Penerapan Lean Manufacturing Untuk Mengurangi Waste Pada Cat Tanki Dengan Metode WRM dan WAQ
Abstract
In the fabrication process always maintain and improve the quality and capacity of the company, but in the fabrication process there are several obstacles that affect product delivery to the project. Because the achievement of the productivity of the company PT Prakarsa Langgeng Maju Bersama is less than optimal because there is still a lot of waste (waste) in the fabrication process. The waste contained in the fabrication process is motion waste, inventory waste, defect waste. Based on the data obtained, there are 245 hours of excess work. For this reason, waste is carried out using a Lean Manufacturing approach, namely the WRM Waste Relationship Matrix and WAQ Waste Assessment Questionnaire by 5W + 1H which is used to support waste and also to find out the relationship between the seven wastes so that existing waste can be eliminated. the highest was Motion at 25.4%, followed by Inventory at 18.4%. and Disability by 15.1%. Proposed improvements related to productivity, need SOPs in machine setup, standardize all processes and inventory management, provide control training to the workers concerned, improve coordination between departments, make tools to standardize all processes and Poka yoke, increase work motivation, improved supervision and implementation of Poka Yoke.
Keywords: Lean Manufacturing, Waste Relationship Matrix, Waste Assesment Quesioner, Fishbone Diagram, Poka Yoke
Full Text:
PDFReferences
Alfiansyah, R. (2018). Identifikasi waste dengan metode waste assessment model dalam penerapan lean manufacturing untuk perbaikan proses produksi (studi kasus pada proses produksi sarung tangan) . (Doctoral dissertation, Institut Teknologi Sepuluh Nopember).
Apriliana, F. S. ((2018).). Penerapan Value Stream Mapping (VSM) Sebagai Upaya Untuk Mengurangi Keterlambatan Process Procurement di. PT. X. Performa: Media Teknik Ilmiah Teknik Industri,, 17(1),61-70.
Gaspersz, V. ( (2011). ). Total Quality Management (untuk Praktisi Bisnis dan Industri). . Jakarta: .: Penebar Swadaya.
Gasperz, V. (2007.). Lean Six Sigma for Maanufacturing and service. Jakarta :: PT. Gramedia.
Kurniawan, T. (2012). Perancangan lean manufacturing dengan metode valsat pada line produksi drum brake type IMV: studi kasus PT. Akebono Brake Astra Indonesia. (Doctoral dissertation, Universitas Indonesia).
Kusnadi, K. N. (2018). Analisa Penerapan Lean Warehouse Dan 5S+ Safety Di Gudang Pt. Nichirin Indonesia. Jurnal Media Teknik dan Sistem Industri,, 2(1), 1-13.
Liker, J. K. (2004). The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer.
Madaniyah, R. N. (2017). Minimasi waste dan lead time pada proses produksi leaf spring dengan pendekatan lean manufacturing. (Doctoral dissertation, Institut Teknologi Sepuluh Nopember).
Muflihah, N. (2017). Implementasi Lean Manufacture Dengan Metode VSM Untuk Mengurangi Waste Pada Proses Produksi Kapal (Studi Kasus PT. PAL Divisi Kaprang). . Reaktom: Rekayasa Keteknikan dan Optimasi,, 2(1), 16-20.
Murnawan, H. (2014). Perencanaan Produktivitas Kerja Dari Hasil Evaluasi Produktivitas Dengan Metode Fishbone Di Perusahaan Percetakan Kemasan Pt. X. Heuristic. Jurnal Teknik Industri HEURISTIC,, 11(01)27-46.
Nugroho, H. R. (2015). Reduksi Waste Dan Peningkatan Kualitas Pada Proses Produksi Roll Gilingan Tebu Dengan Pendekatan Metodologi Lean Six Sigma (Studi Kasus: PT. Barata Indonesia, Gresik). (Doctoral dissertation, Institut Technology Sepuluh Nopember),.
Prihantoko, S. A. (2015). Minimasi Waste Pada PT. Petrokimia Kayaku Menggunakan Analisis Lean Manufacturing. (Doctoral dissertation, UAJY).
Rawabdeh, I. A. (2005). A model for the assessment of waste in job shop environments. International Journal of Operations & Production Management, 25(8):800-822.
Ristyowati, T. M. (2017). Minimasi Waste Pada Aktivitas Proses Produksi Dengan Konsep Lean Manufacturing. (Studi Kasus di PT. Sport Glove Indonesia)., Opsi, 10(1), 85-96.
Robert Maurer, P. (2004). One Small Step Can Change Your Life: The Kaizen Way. New York: Workman Publishing.
Setyawan, W. &. (2017). Minmasi Waktu Produksi Sepatu Allstar Type Chuck Taylor Low Cut Menggunakan Value Stream Mapping (VSM) dan Penjadwalan. Jurnal Media Teknik dan Sistem Industri, Vol 1,26-33.
Stewart, J. (2011). The Toyota Kaizen Continuum. London: Taylor & Francis Group.
Sudiro, S. (2018). Pengursngan Pemborosan Pada Proses Produksi Dengan Menggunakan WRM, WAQ DAN VALSAT Pada Sistem LEAN MANUFAKTUR (Studi Kasus Pada Produksi Setrika Lisrik). . Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin,, 8(2), 61-68.
Utama, D. M. (2016). Identifikasi waste pada proses produksi key set clarinet dengan pendekatan lean manufacturing. Jurnal Ilmiah Teknik Industri,, 15(1), 36-46.
Wilson, L. (2010). How to Implement. Seoul Singapore Sydney Toronto: The McGraw-Hill.
Zahraee, S. M. (2014). Lean manufacturing implementation through value stream mapping: A case study. . Jurnal Teknologi,, 68(3),119-124
DOI: http://dx.doi.org/10.31000/jim.v8i1.8082
Article Metrics
Abstract - 477 PDF - 898DOI (PDF): http://dx.doi.org/10.31000/jim.v8i1.8082.g4033
Refbacks
- There are currently no refbacks.
Abstracted/Indexed On :
Counter Stat:
