PERANCANGAN ULANG PRODUK OS TABLE DENGAN MENGGUNAKAN METODE ANTROPOMETRI

Tri Widodo, Ismail Ferdiansyah, Adi Prasetyo

Abstract


The table is a furniture that has a basic surface and legs as a buffer that varies in shape and function. The design of this product is intentionally dedicated to the needs of a table that has a large capacity to store food, drinks, and even other tools. But the dimensions of the OS Table is currently felt not to provide comfort to its users. Therefore, the idea arose to redesign the multifunctional table design (OS Table) to create comfort for its users. This research was conducted using the Anthropometry method. Based on the results of data processing that has been done by collecting anthropometric data, namely Popliteal Height (Tpo), Elbow Length to Hands (Pst), Sitting Elbow Height (Tsd), Coverage of Hands Forward (Jtd) and Length of Hand Range (Prt), then it can be concluded the results of the OS Table redesign by using the 5th percentile for the smallest and the 95th percentile for the largest resulting in the dimensions of the maximum length of the table is 150 cm and the minimum length of the table is 118 cm, the width of the table is 69 cm while the height of the table is 69 cm. This multifunctional table (OS Table) has been redesigned to achieve an ergonomic dimension, thus providing comfort for the user.

Keywords: Tables , OS Table, Anthropometry, Ergonomics, Product Design


Full Text:

PDF

References


Alamsyah, N. & Rahim, A. (2017). Perancangan Desain Sajadah Dengan Pendekatan Ergonomi. Jurnal Teknik Ibnu Sina , Vol. 2, No. 2, Hal. 91-99

Chuan, T.K., Hartono, M., & Kumar, N. (2010). Anthropometry of the Singaporean and Indonesian populations. International Journal of Industrial Ergonomics, 40, 757-766.

Hanson, L., Sperling, L., Gard, G., Ipsen, S. & Vergara, C. O. (2008). Swedish Anthropometrics For Product And Work Place Design. Applied Ergonomics, Vol. 40, Hal. 797-806.

Harahap, P., Huda, Listiani N. & Pujangkoro, Sugih A. (2013) Analisis Ergonomi Redesain Meja Dan Kursi Siswa Sekolah Dasar. E-Jurnal Teknik Industri FT USU, Vol. 3, No. 2, Hal 38-44.

Hermanto, Sinambela S. & Irvan M. (2017). Usulan Rancangan Ukuran Pada Meja Dan Kursi Lipat Belajar Yang Ergonomis Untuk Rumah Petak Di Jakarta. Jurnal IKRAITH Teknologi, Vol. 1 No. 2 Hal. 9-15.

Hernawati S. T. & Ramdani R. (2019). Desain Kursi Santai Multifungsi Ergonomis Dengan Menggunakan Pendekatan Antropometri. Journal Industrial Manufacturing, Vol 4, No. 1, Hal. 45-54.

Ismaila, S. O., Musa, A. I., Adejuyigbe, S. B. & Akinyemi, O. D. (2013). Anthropometric Design Of Furniture For Use In Tertiary Institutions In Abeokuta, Southwestern Nigeria. Engineering Review. Vol. 33, Hal. 179-192.

Ismaila, S. O., Akanabi, O. G., Oderinu, S. O., Anyanwu B. U., & Alamu, K. O. (2015). Design Of Ergonomically Compliants Desks And Chairs For Primary Pupil In Ibadan Nigeria. Journal Engineering Science and Technology. Vol. 10, No.1, Hal. 35-46.

Kristanto, A. & Saputra D. A. (2011). Perancangan Meja Dan Kursi Kerja Yang Ergonomis Pada Stasiun Kerja Pemotongan Sebagai Upaya Peningkatan Produktivitas. Jurnal Ilmiah Teknik Industri, Vol. 10, No. 2 Hal. 78-87.

Nurmianto, Eko. 1996. Ergonomi, Konsep Dasar Dan Aplikasinya. Surabaya : Guna Widya.

Pardede, D. M., Matondang, A. R. & Huda, L. N. (2013). Analisis Ergonomi Desain Kursi Kerja Karyawan Di PT. YYY. E-Jurnal Teknik Industri FT USU. Vol. 8, No. 2, Hal. 14-18.

Rizani, N. C. & Satria A. (2011). Perancangan Dan Pengembangan Tas Backpack Ergonomis Dan Multifungsi. Jurnal Teknik Industri ISSN: 1411-6340, Hal. 92-103.

Robinette K. M. (2013). Anthropometry For Product Design, Handbook of Human Factors and Ergonomics.

Santoso, Gempur, 2013. Ergonomi Terapan, Jakarta : Prestasi Pustaka Publisher

Sokhibi A. (2017). Perancangan Kursi Ergonomis Untuk Memperbaiki Posisi Kerja Pada Proses Packaging Jenang Kudus. Jurnal Rekayasa Sistem Industri, Vol. 3 No. 1, Hal. 61-72.

Widodo, Imam Djati. 2003. Perencanaan dan Pengembangan Produk. Yogyakarta : UII Press Indonesia.

Widodo T. & Sasmita H. (2016). Perancangan Kursi Kerja Berdasarkan Prinsip-Prinsip Ergonomi Pada Bagian Pengemasan Di Pt. Propan Raya ICC Tangerang. Journal Industrial Manufacturing, Vol. 1 No. 2.

Wignjosoebroto, Sritono. (2006). Ergonomi Studi Gerak dan Waktu, Surabaya Guna Widya

Yuliarty P., Permana T. & Pratama A. (2008). Pengembangan Desain Produk Papan Tulis Dengan Metode Quality Function Deployment (QFD). Jurnal Ilmiah PASTI, Vol. VI, Hal 1-13.

Konsultan Statistik - Uji Normalitas Dengan Kolmogrov Smirnov – Sabtu, 21 September 2019 - http://www.konsultanstatistik.com/2009/03/uji-normalitas-dengan-kolmogorov.html




DOI: http://dx.doi.org/10.31000/jim.v6i1.4118

Article Metrics

Abstract - 4494 PDF - 5739

DOI (PDF): http://dx.doi.org/10.31000/jim.v6i1.4118.g2356

Refbacks

  • There are currently no refbacks.


Abstracted/Indexed On :


Google-Scholar-logo-2015    garuda1   Scilit logo   base logo   dimensions  

Counter Stat: